Extech PRT200 Bedienungsanleitung
Extech
Multimeter
PRT200
Lies die bedienungsanleitung für Extech PRT200 (5 Seiten) kostenlos online; sie gehört zur Kategorie Multimeter. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 17 Bewertungen. Hast du eine Frage zu Extech PRT200 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/5
USERMANUAL
Non-Contact Phase Rotation Tester
Model PRT200
Additional ManualUser Translationsavailable at www.extech.com
PRT200A-en-GB_V1.6 12/16 2
Introduction
Congratulations on your purchase of this Extech Meter. The PRT200 is used to quickly and
accurately determine three phase sequence for motor installation and repair. The non-contact
voltage detecting technique permits easy connection to insulated conductors, avoiding uncertain
and difficult connections to bare high voltage wires. This meter is shipped fully tested and
calibrated and, with proper use, will provide years of reliable service.
Safety
International Safety Symbols
This symbol, adjacent to another symbol or terminal, indicates the user must refer to the
manual for further information.
This symbol, adjacent to a terminal, indicates that, under normal use, hazardous voltages
may be present.
Double insulation
Safety Notes
1. Read the following safety information carefully before attempting to operate the tester.
2. Use the tester only as specified in this manual or the protection provided by the tester may
be impaired.
3. This instrument cannot identify a missing earth line.
4. To assure accurate results, do not touch the clips during measurements.
5. Do not pull the cable when removing the measurement clips from the measured conductors.
It may damage the test lead.
6. Do not expose the instrument to direct sunlight, high temperature, high humidity or dew.
7. Keep the tester dry! Do not use the instrument when it is wet.
8. Do not mix old batteries with new ones.
9. Never open the battery compartment cover while connected to live conductors.
10. Avoid large shocks or vibrations, they may damage the tester.
PRT200A-en-GB_V1.6 12/16 3
Meter Description
1. Clockwise phase sequence LED
2. Rotation LEDs
3. Live indication LEDs
4. Power on and low battery LED
5. Power switch
6. Brightness switch
7. Counter-Clockwise phase sequence LED
8. Rotation LEDs
9. Buzzer
1. Magnets
2. Battery compartment cover
3. Battery compartment screw
1
2
1
3
1
2
3
4
5
6
7
8
9
7
Produktspezifikationen
| Marke: | Extech |
| Kategorie: | Multimeter |
| Modell: | PRT200 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Extech PRT200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Multimeter Extech
19 September 2024
30 August 2024
28 August 2024
28 August 2024
28 August 2024
23 August 2024
18 August 2024
14 August 2024
14 August 2024
13 August 2024
Bedienungsanleitung Multimeter
- Fluke
- Hager
- APPA
- Laserliner
- Clas Ohlson
- Rigol
- Bearware
- FERM
- Megger
- IDEAL
- Noyafa
- Skandia
- Milwaukee
- FLIR
- Stanley
Neueste Bedienungsanleitung für -Kategorien-
9 Juni 2025
8 Juni 2025
8 Juni 2025
7 Juni 2025
4 Juni 2025
31 Mai 2025
31 Mai 2025
30 Mai 2025
3 Dezember 2024
2 Dezember 2024