Fantini Cosmi CH175 Bedienungsanleitung
Fantini Cosmi
Thermostat
CH175
Lies die bedienungsanleitung für Fantini Cosmi CH175 (2 Seiten) kostenlos online; sie gehört zur Kategorie Thermostat. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Fantini Cosmi CH175 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
1 RELAY WIRELESS ACTUATOR FOR SYSTEM
The CH175 unit is an actuator module which, connected to the Intellicomfort+ wireless network, allows a remote control of the boiler or the zone solenoid-
valve. The CH175 module also provides to the wireless repeater functionality, extending the radio range of the Intellicomfort+ wireless network.
SCOPE OF DELIVERY
1 CH175 actuator, 1 two poles removable terminal block, 1 three poles removable terminal block and this installation manual.
INSTALLATION AND CONNECTION
The installation must be carried out by qualied personnel, in compliance with the requirements concerning the installation of electrical devices. Make sure
that the power network is disconnected before making any connection or working on the device.
Make the electrical connections as shown in the picture 2 or 3 with the connection diagrams examples.
Notes
WARNING:The “L1” pole of the output terminal block is connected on the PCB board with the “L” pole of the power terminal block.
To control units with “free voltage contact”, adopt the connection example of the picture 2.
To control units with “powered contact”, adopt the connection example of the picture 3.
Picture 1
Picture 2 Picture 3
TECHNICAL DATA
²
Power supply: 230Vca ±10% - 50Hz
Power consumption: 20VA max (load excluded)
Transceiver frequency: 868MHz
Relay contacts rating: 16(4)A – 250Vca
Maximum cables size: 2,5 mm²
Degree of protection: IP20;
Operating temperature: 0 ÷ 50°C;
Storage temperature: -20 ÷ +70°C;
Shape type: gray ABS plastic;
Dimensions: 36x58x90 mm. - DIN-rail (2 modules)
Responding to Directive 2014/53 / EU (RED).
5679633C
COMMISSIONING AND NETWORK INCLUSION
The CH175 actuator, after power up, will work only after the INTELLICOMFORT+ wireless network inclusion step.
For this procedure it’s necessary to use a special Programmer tool (p/n 1590880) that provides all instructions by display
messages. When required, will be necessary to touch the “X” area of the actuator with the tool (see picture 4). For more details,
please refer to the wireless INTELLICOMFORT+ system manual.
ATTENTION!
pdf.fantinicosmi.it
ATTENZIONE!
http://www.fantinicosmi.it
Produktspezifikationen
| Marke: | Fantini Cosmi |
| Kategorie: | Thermostat |
| Modell: | CH175 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Fantini Cosmi CH175 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Thermostat Fantini Cosmi
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
20 Juni 2025
19 Juni 2025
19 Juni 2025
Bedienungsanleitung Thermostat
- Dimplex
- Finder
- Nedis
- Go Green
- Agpo Ferroli
- STI
- ELKO
- Buderus
- Meross
- Daikin
- Corberó
- Niko
- Gigaset
- Hager
- BTicino
Neueste Bedienungsanleitung für -Kategorien-
7 August 2025
3 August 2025
1 August 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
30 Juli 2025
28 Juli 2025