Fenix TFT Bedienungsanleitung
Fenix
Thermostat
TFT
Lies die bedienungsanleitung für Fenix TFT (2 Seiten) kostenlos online; sie gehört zur Kategorie Thermostat. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 11 Bewertungen. Hast du eine Frage zu Fenix TFT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
IMPORTANT!
The thermostat power supply must be disconnected when inserting the
display part (the screen) into the base or removing it from the base!
Failure to follow this instruction may result in an irreparable damage to
the thermostat.
Before starting work the installer should carefully read this Installation & Operation
Manual, and make sure all instructions contained therein are understood and
observed.
- The thermostat should be mounted, operated and maintained by specially trained
personnel only. Personnel in the course of training are only allowed to handle the
product under the supervision of an experienced fitter. Subject to observation of the
above terms, the manufacture shall assume the liability for the equipment as
provided by legal stipulations.
- A scheme of connection is provided on a separate sheet.
- All instructions in this Installation & Operation manual should be observed when
working with the thermostat. Any other application shall not comply with the
regulations. The manufacturer shall not be liable in case of incompetent use of the
thermostat. Any modifications and amendments are not allowed for safety reasons.
The maintenance may be performed by service shops approved by the
manufacturer only.
- The functionality of the controller depends on the model and equipment. This
installation leaflet is part of the product and has to be obtained.
APPLICATION
- The thermostats are developed to control and manage all type of heating
installations.
- The controllers have been designed for use in residential rooms, office spaces and
industrial facilities.
Verify that the installation complies with existing regulations before operation to
ensure proper use of the installation.
SAFETY INSTRUCTIONS
Before starting work disconnect the power supply!
- All installation and wiring work related to the thermostat must be carried out only
when de-energized. The appliance should be connected and commissioned by
qualified personnel only. Make sure to adhere to valid safety regulations.
- The thermostats are neither splash- nor drip-proof. Therefore, they must be
mounted at a dry place.
- Do not interchange the connections of the sensors and the 230V connections
under any circumstances! Interchanging these connections may result in life
endangering electrical hazards or the destruction of the appliance and the
connected sensors and other appliances.
Do not switch off the thermostat’s power supply outside the heating season - it may
shorten the lifespan of the standby battery! Switch off the heating using the
thermostat’s Switched Off mode
FIRST INSTALLATION
Batteries inside the thermostat must be charged for at least 6 hours to reach
maximum capacity to back up time.
1. Product overview
Touch screen programmable thermostat specially designed to control different types
of heating systems.
The thermostat will allow you to optimize your energy consumption and increase
your comfort levels.
- Modern design with touch screen.
- Simplified wiring & Installation.
- “Easy program creation” function.
- Fully programmable.
- Temporary override function.
- Anti freeze function.
- Holiday or Reception function.
- Connections for 2 sensors.
- Estimation of the cost and consumption of the installation
Optional
- 2 External sensors with several possibilities of regulation. (Floor,
combined…)
2. Menu structure
Mode
Manuel
Timer
OFF
Anti freeze
Vacation
Vacation settings
OFF
Anti freeze
Reduce
Sunday’s program
Set Return Date
Program
Program Menu
View Current Program
Select Program
Edit Program
User 1
User 2
User 3
Settings
Language
English
German
Czech
Spanish
French
Date and Time
Date
Time
DST
Display
Colour
- Blue
- Red
- Green
- None
Clean Screen
Screen Lock
Floor Temperature Display
- Yes
- No
Degree Format
- °C
- °F
Time Format
- 12h
- 24h
Installation
Sensor
Sensor Calibration
- Int
- Ext1
- Ext2
Ext. Sensor Type
- Ext1 (10K – 12K – 15K)
- Ext2 (10K – 12K – 15K)
Regulation
Sensor Regulation
- Air
- Air + Floor
- Floor
- Air (Ext) + Floor
- Air + Floor (x2)
Regulation Type
- ON/OFF
- PID
Floor Limit
- Low
- High
First Heating
- Wood (10 days)
- Concrete (21 days)
- Ceiling (10 days)
Smart Start
o Yes
o No
Open window function
o Yes
o No
Statistics
View
View Last Day
View Months
View Year
kWh Price
Heating Power
RESET (press 2 seconds on the RESET button to reset your installation)
3. Installation menu
This section will guide you through setting up your thermostat for the first time.
3.1. Language
Press the (◄) or (►) keys near the flags to select the chosen language.
The active language is framed.
Press the ►key in the bottom right corner to continue the settings of the installation.
3.2. Degree format
Select the degree format chosen by pressing on the touch button near the degrees.
The active option is colored red
Press the ►key in the bottom right corner to continue to the next part of the
installation
You can return to the previous menu by pressing the key.
3.3. Date and Time
Select the time format 12H or 24H using the same method as above.
Press the (◄) or (►) keys to activate the value to be modified.
Each time a value is highlighted, it can be modified by pressing the (+) or (-) keys.
Press the ►key in the bottom right corner to continue to the next part of the
installation
You can return to the previous menu by pressing the key.
3.4. Sensor Regulation
Select the chosen sensor regulation by pressing on the touch button near the sensor
regulation possibilities
The active touch is colored red
Press the ►key in the bottom right corner to continue to the next part of the
installation
You can return to the previous menu by pressing the key.
3.5. Heating power
Press the (◄) or (►) keys to select a unit, press the (+) or (-) keys to modify the
heating power.
This value is used to estimate the running cost of the system. You can return to the
previous menu by pressing the key.
Press the ►key in the bottom right corner to continue.
The main screen is displayed.
The default working mode will automatically be set to manual mode.
4. Mode of operation
How to change the current mode?
Press on the key on the main screen and then press on the “Mode” button to
access to the operating modes.
You can now press the (◄) or (►) keys to scroll and select a mode.
The selected mode is framed, to select a mode press the key to return to the
main screen.
4.1 Programmable mode
In this mode the thermostat will follow the chosen program (Built-in or customized)
according to the actual time
You can temporarily override the selected program, by pressing the temperature
displayed on the main screen.
The small hand logo will be displayed when the override function is active.
To exit override mode, switch to manual then back to automatic mode
You will have the choice between 4 built-in programs that can’t be modified and 3 user
programs that you can customize.
1- How to customize a user program
Press on the “Mode” button then on “Edit Program” button and choose a user
program.
Then you will have to choose between 3 configurations:
a- Set day by day
You will set a new program for each day.
Automatically, the first day you will program is Monday.
The minimum program step is 15 minutes.
You will have to configure several periods.
The first period begins at 00:00. Then, choose the end time period with the (+) and (-)
keys and the temperature to be followed during this period.
Press “Next” button to continue the program. The next period will start at the end of
the last period.
For all periods you will define, you have to choose the end period and the
temperature. The last period stops at 24:00. Then press on the Next button.
Main screen
N454/R04(08.10.14)
Produktspezifikationen
| Marke: | Fenix |
| Kategorie: | Thermostat |
| Modell: | TFT |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Fenix TFT benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Thermostat Fenix
29 August 2024
7 August 2023
7 Juli 2023
Bedienungsanleitung Thermostat
- Itho
- Panasonic
- ELV
- H-Tronic
- Plugwise
- GENERAL Life
- Emerson
- Hager
- Ferroli
- De Dietrich
- Eberle
- Watts
- Profile
- TFA
- Netatmo
Neueste Bedienungsanleitung für -Kategorien-
19 Januar 2026
14 Januar 2026
14 Januar 2026
13 Januar 2026
2 Januar 2026
29 Dezember 2026
27 Dezember 2025
25 Dezember 2025
23 Dezember 2025
23 Dezember 2025