Festo DADM-EP-G6-10 Bedienungsanleitung

Lies die bedienungsanleitung für Festo DADM-EP-G6-10 (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 5 Bewertungen. Hast du eine Frage zu Festo DADM-EP-G6-10 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

DADM-EP-G6

Intermediate-position module

Festo SE & Co. KG

Ruiter Straße 82

73734 Esslingen

Deutschland

+49 711 347-0

www.festo.com

Operating instructions

8159559

2021-11d

[8159561]

Translation of the original instructions

© 2021 all rights reserved to Festo SE & Co. KG

1

Applicable Documents

All available documents for the product

è

www.festo.com/sp.

2Safety

2.1Safety instructions

–

Only use the product in its original condition without unauthorised modifica-

tions.

–

Take into account the ambient conditions at the location of use.

–

Observe the identifications on the product.

–Only use the product if it is in perfect technical condition.

–

Store the product in a cool, dry environment protected from UV and corrosion.

Keep storage times short.

–Before working on the product, switch off the compressed air supply and lock it

to prevent it from being switched on again.

–Observe the tightening torques. Unless otherwise specified, the tolerance is

± 20%.

2.2Intended use

The product is intended to be used as an external stop for a linear drive and

enables the slide to be placed in an intermediate position within the stroke range.

2.3Foreseeable misuse

Operating the product without suitable cushioning will destroy it.

–

Use suitable cushioning components

è

www.festo.com/catalogue.

2.4

Training of qualified personnel

Work on the product may only be carried out by qualified personnel who can

evaluate the work and detect dangers. The qualified personnel have skills and

experience in dealing with electropneumatic (open-loop) control technology.

3Additional information

–Contact the regional Festo contact if you have technical problems

è

www.festo.com.

–Accessories and spare parts

è

www.festo.com/catalogue.

4

Function

The stop lever of the intermediate-position module swivels in and out when

the pneumatic ports are pressurised. In the swivelled-out status, the cushioning

component in the shock absorber retainer advances to the stop lever. The slide of

the linear drive is therefore in an intermediate position. The position of the stop

lever can be queried by the proximity switch in the slots .

5Product design

1

2

3

4

5

6

7

8

9

10

Fig. 1:Product design

1

Mounting interface

lateral (2x)

2

Sliding pad

3

Slot for proximity switch (2x)

4

Mounting interface

underneath (2x)

5

Linear drive

- DGSL

- DGST

6

Shock absorber retainer

- DADP-ES-G6 for DGSL

- DADP-ES-G8 for DGST

7

Intermediate-position module

DADM-EP-G6

8

Pneumatic port 1

9

Pneumatic port 2

10

Stop lever

6

Assembly

6.1

Mount the intermediate position module on the linear drive DGSL

1.

Fasten the intermediate-position module to the mounting surface with two

screws and the accompanying centring sleeves . Tightening torque

è

Tab. 1

Tightening torque for mounting the intermediate position module. The inter-

mediate position is fine-tuned during commissioning by screwing the cush-

ioning component in or out.

The following mounting interfaces are possible:

–Mounting interface, lateral

–

Mounting interface, underneath

2.

Fasten the shock absorber retainer to the slide of the linear drive with two

screws . Tightening torque

è

Tab. 2 Tightening torque for mounting shock

absorber retainer on linear drive DGSL.

7

6

DADM-EP-G6-10-16

Centring sleeveZBV-10-9ZBH-12

Mounting interface, underneath

ScrewM6M8

Tightening torque[Nm]1010

Mounting interface, lateral

ScrewM5M6

Tightening torque[Nm]610

Tab. 1:

Tightening torque for mounting the intermediate position module

DGSL-12-16-20-25

Centring sleeveZBV-12-7ZBV-12-9

ScrewM5M6

Tightening torque[Nm]610

Tab. 2:

Tightening torque for mounting shock absorber retainer on linear drive

DGSL

Produktspezifikationen