Forte Lighting 5748-03 Bedienungsanleitung
Seiten 1 Beleuchtung
Lies die Bedienungsanleitung für Forte Lighting 5748-03 kostenlos online oder lade das PDF herunter. 18 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
INSTALLATION INSTRUCTIONS
For Model -03 5748
READ AND SAVE THESE INSTRUCTIONS
These instructions are provided for your safety. It is essential to read them carefully and completely before installing the
light fixture. We strongly suggest that all direct-wired fixtures be installed by a qualified, licensed electrician.
PREPARING FOR INSTALLATIONS
Remove all contents from the carton. See the important notes above. Shut off the power at the circuit breaker and completely remove
the old fixture from the ceiling, including the old mounting strap.
The mounting plate(A) contains several pairs of threaded holes. Find holes that match the spacing of the holes on the junction boxPull .
the house wires through the center of the mounting plate(A). Place the mounting plate(A) over the junction box to alignwith the holes
on the fixturebackplate(D). Secure the mounting plate(A) to the junction box by securely tightening the mounting screws(B ’s ).
CONNECTING THE WIRES
Attach the fixtures wire to the power supply wires at the junction box. Connect the black wire to the black wire(or smooth),’ the white
wire to the whitethe ground wire to the ground wire(or ribbed),(green or copper). Twist the end of the wire pairs together, and
twist on a wire connector. Make sure all twists are in the same direction. If there is no ground wire(green or copper) from the junction
box, locate the ground screw(C) on the mounting plate(A) and wrap the fixtures ground wire around the green ground screw(C). Use a ’
screwdriver to secure the ground screw(C) onto the mounting bracket. Tuck all wires neatly into the junction box.
FINISHING THE INSTALLATIONS
Place the fixtures backplate(D) against the mounting surface and fasten the backplatescrews(E).Secure the glass(G) and the metal ’
washer(H)onto the socket by screwing the socket ring(Iuntil it is tightened. Adjust the glass to level. Install light bulb(s)(not included) in )
accordance with the fixtures specifications. Do not exceed the recommended maximum wattage. ’
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
BEFORE INSTALLATION
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
F
Produktspezifikationen
| Marke: | Forte Lighting |
| Kategorie: | Beleuchtung |
| Modell: | 5748-03 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Forte Lighting 5748-03 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Beleuchtung Forte Lighting
Forte Lighting 2746-01 Bedienungsanleitung Forte Lighting 5197-01 Bedienungsanleitung Forte Lighting 2751-01 Bedienungsanleitung Forte Lighting 2765-01 Bedienungsanleitung Forte Lighting 2696-06 Bedienungsanleitung Forte Lighting 2713-08 Bedienungsanleitung Forte Lighting 2691-01 Bedienungsanleitung Forte Lighting 2710-02 Bedienungsanleitung
Alle Forte Lighting Beleuchtung Bedienungsanleitungen
Beliebt in Beleuchtung
Forte Lighting 2688-01 Bedienungsanleitung Forte Lighting 7096-06 Bedienungsanleitung Forte Lighting 5535-01 Bedienungsanleitung
Bedienungsanleitung Beleuchtung
Neueste Bedienungsanleitungen für Beleuchtung
Robert Abbey RR21X Bedienungsanleitung Robert Abbey A690X Bedienungsanleitung IKEA GOKVÄLLÅ 706.239.34 Bedienungsanleitung Robert Abbey S4500 Bedienungsanleitung Robert Abbey S2181 Bedienungsanleitung Dainolite SMA-241P Bedienungsanleitung Progress Lighting P5610 Bedienungsanleitung Progress Lighting P560296 Bedienungsanleitung Progress Lighting P5651 Bedienungsanleitung NightStick XPR-9864 Bedienungsanleitung