Fujitsu ASGG12CPTB-B Bedienungsanleitung
Seiten 14 Engels Splitter
Lies die Bedienungsanleitung für Fujitsu ASGG12CPTB-B kostenlos online oder lade das PDF herunter. 45 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
En-1
WARNING
• The appliance shall be installed, operated and stored in a room with a oor area larger
than 2.60 m2
• Installation of this product must be done by experienced service technicians or profes-
sional installers only in accordance with this manual. Installation by non-professional
or improper installation of the product might cause serious accidents such as injury,
water leakage, electric shock, or re. If the product is installed in disregard of the
instructions in this manual, it will void the manufacturer’s warranty.
• Do not turn on the power until all work has been completed. Turning on the power be-
fore the work is completed can cause serious accidents such as electric shock or re.
• If refrigerant leaks when you are working, ventilate the area. If the leaking refrigerant
is exposed to a direct ame, it may produce a toxic gas.
• Installation must be performed in accordance with regulations, codes, or standards for
electrical wiring and equipment in each country, region, or the installation place.
• Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they
do not play with the appliance.
• To avoid danger of suocation, keep the plastic bag or thin lm used as the packaging
material away from young children.
• The appliance shall be stored in a room without continuously operating ignition
sources (for example: open ames, an operating gas appliance or an operating
electric heater).
• Do not pierce or burn.
• Be aware that refrigerants may not contain an odour.
• Keep any required ventilation openings clear of obstruction.
• If the power cable or the connection cable is damaged, it must be replaced by the
manufacturer, its service agent or similar qualied persons in order to avoid a safety
hazard.
CAUTION
• Read carefully all safety information written in this manual before you install or use the
air conditioner.
• Install the product by following local codes and regulations in force at the place of
installation, and the instructions provided by the manufacturer.
• This product is part of a set constituting an air conditioner. The product must not be
installed alone or be installed with a device not authorized by the manufacturer.
• Always use a separate power supply line protected by a circuit breaker operating on
all wires with a distance between contact of 3 mm for this product.
• To protect the persons, ground (earth) the product correctly, and use the power cable
combined with an Earth Leakage Circuit Breaker (ELCB).
• This product is not explosion proof, and therefore should not be installed in an explo-
sive atmosphere.
• To avoid getting an electric shock, never touch the electrical components soon after
the power supply has been turned o. After turning o the power, always wait 5 min-
utes or more before you touch the electrical components.
• This product contains no user-serviceable parts. Always consult experienced service
technicians for repairing.
• When moving or relocating the air conditioner, consult experienced service technicians
for disconnection and reinstallation of the product.
• Do not touch the aluminum ns of heat exchanger built-in the indoor or outdoor unit to
avoid personal injury when you install or maintain the unit.
• Do not place any other electrical products or household belongings under the product.
Condensation dripping from the product might get them wet, and may cause damage
or malfunction to the property.
• Be careful not to scratch the air conditioner when handling it.
1.1. Precautions for using R32 refrigerant
The basic installation work procedures are the same as conventional refrigerant (R410A,
R22) models.
However, pay careful attention to the following points:
Since the working pressure is 1.6 times higher than that of refrigerant R22 models,
some of the piping and installation and service tools are special. (Refer to “2.1. Instal-
lation tools”.)
Especially, when replacing a refrigerant R22 model with a new refrigerant R32 model,
always replace the conventional piping and flare nuts with the R32 and R410A piping and
are nuts on the outdoor unit side.
For R32 and R410A, the same are nut on the outdoor unit side and pipe can be used.
Models that use refrigerant R32 and R410A have a dierent charging port thread diam-
eter to prevent erroneous charging with refrigerant R22 and for safety. Therefore, check
beforehand. [The charging port thread diameter for R32 and R410A is 1/2-20 UNF.]
Be more careful than R22 so that foreign matter (oil, water, etc.) does not enter the
piping. Also, when storing the piping ,securely seal the opening by pinching, taping, etc.
(Handling of R32 is similar to R410A.)
AIR CONDITIONER
Wall Mounted Type
INSTALLATION MANUAL
Contents
1. SAFETY PRECAUTIONS ..................................................................1
1.1. Precautions for using R32 refrigerant .........................................1
2. PRODUCT SPECIFICATION .............................................................3
2.1. Installation tools ..........................................................................3
2.2. Accessories ................................................................................4
2.3. Pipe requirement ........................................................................4
2.4. Electrical requirement .................................................................4
2.5. Optional parts .............................................................................4
3. INSTALLATION WORK .....................................................................4
3.1. Selecting an installation location ................................................4
3.2. Removing and replacing parts ....................................................5
3.3. Pipe installation ..........................................................................6
3.4. Electrical wiring ...........................................................................8
3.5. Remote controller installation .....................................................9
4. OPTIONAL INSTALLATION WORK ..................................................9
4.1. Optional kit installation ................................................................9
4.2. Group control ............................................................................10
5. FUNCTION SETTING......................................................................10
5.1. Function details .........................................................................11
6. TEST RUN .......................................................................................12
7. FINISHING ......................................................................................12
8. CUSTOMER GUIDANCE ................................................................12
9. ERROR CODES ..............................................................................12
PART No. 9387848076-02
1. SAFETY PRECAUTIONS
• Be sure to read this manual thoroughly before installation.
• The warnings and precautions indicated in this manual contain important information
pertaining to your safety. Be sure to observe them.
• Hand this manual, together with the operation manual, to the customer. Request the
customer to keep them on hand for future use, such as for relocating or repairing the
unit.
WARNINGIndicates a potentially or imminently hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTIONIndicates a potentially hazardous situation that may result in
minor or moderate injury or damage to property.
For authorized service personnel only.
Produktspezifikationen
| Marke: | Fujitsu |
| Kategorie: | Splitter |
| Modell: | ASGG12CPTB-B |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Fujitsu ASGG12CPTB-B benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Splitter Fujitsu
Fujitsu ARG45FUAN Bedienungsanleitung Fujitsu ARYG18LSLAP Bedienungsanleitung Fujitsu ASHG12LTCA Bedienungsanleitung Fujitsu ECO ASYG24KLCA Bedienungsanleitung Fujitsu ASGA12BMWA-B Bedienungsanleitung Fujitsu ABYG18LVTB Bedienungsanleitung Fujitsu Standard ASHG14KMCC Bedienungsanleitung Fujitsu ARYG14LSLAP Bedienungsanleitung
Alle Fujitsu Splitter Bedienungsanleitungen
Beliebt in Splitter
Fujitsu ASHG07KPCA Bedienungsanleitung Fujitsu ASMG18CPTB Bedienungsanleitung Fujitsu ARHG36LHTBP Bedienungsanleitung
Bedienungsanleitung Splitter
Neueste Bedienungsanleitungen für Splitter
Samsung AM280KXVAGH Bedienungsanleitung Black Box AVX-DVI-FO-SP4 Bedienungsanleitung Black Box AVX-DVI-FO-SP8 Bedienungsanleitung Black Box AVSP-HDMI1X4 Bedienungsanleitung Black Box AVSP-HDMI1X8 Bedienungsanleitung Black Box AVX-DVI-FO-SPCS Bedienungsanleitung Black Box TL421A Bedienungsanleitung Rocketfish RF-G1603 Bedienungsanleitung C2G 89014 Bedienungsanleitung Planet POE-173S-12V Bedienungsanleitung