Garde XL TSXL38 Bedienungsanleitung
Garde XL
Schneidemaschine
TSXL38
Lies die bedienungsanleitung für Garde XL TSXL38 (4 Seiten) kostenlos online; sie gehört zur Kategorie Schneidemaschine. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Garde XL TSXL38 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
USER MANUAL
Item #181TSXL316 Item #181TSXL14 Item #181TSXL38
Item #181TSXL732
07/2021
Tomato Slicer XL
3
/
16
”
1
/
4
”
3
/
8
”
7
/
32
”
Safety Instructions
Be careful when handling and operang the machine, as the blades are very sharp. Always keep your hands
away from the blades.
Preparation
1) This unit comes fully assembled.
2) Place the unit on a sturdy work surface.
3) The guides for the pusher assembly located along the sides of the cung board need to be lubricated
regularly to keep your slicer operang properly. Using a food grade sanitary lubricant (such as
401PETROLGEL) will ensure you get a clean slice every me.
Cleaning and Maintenance
1) Remove the thumb screws and the slide stop from the pusher assembly. Pull the pusher o the end of the
slide board.
2) Remove the mounng screws from the slide board and blade shield.
3) To totally disassemble the pusher assembly, remove the acorn and hex nuts on the top of the stack and
carefully remove the pusher plates and spacers. Remove the addional screws if you wish to disassemble
the guide plate.
4) To re-assemble, reverse the procedure. NOTE: Always rinse the tomato slicer in cold or lukewarm water
aer it has been washed in hot water. Hot water makes the slide board expand which may make it
dicult to use the pusher assembly unl the slide board returns to room temperature. Aer re-assembly,
you must retenon the blades.
Blade Tension Instructions
1) Ensure that the blade holder assembly is rmly mounted on the frame with the sharp side of the blades
toward the pusher assembly.
2) Be sure the hex head screws on the right side of the blade holder are ght.
3) Tighten the hex head screws on the le end of the blade holder unl the blades “hum” when strummed
or plucked.
4) Check the blade tension each me the machine is used.
Please read and comply with the instrucons listed on this document. To get the best service life and
performance from your machine, clean it thoroughly before and aer each use by following the instrucons
listed below. Minimize the use of alkaline cleaners as they may dull the nish and cause ping.
USER MANUAL
Replacement Parts
3/16” Blade Assembly
#181TSXLBD316
7/32” Blade Assembly
#181TSXLBD732
3/16” Pusher Head
Assembly
#181TSXLP316
7/32” Pusher Head
Assembly
#181TSXLP732
1/4” Blade Assembly
#181TSXLBD14
1/4” Pusher Head
Assembly
#181TSXLP14
3/8” Blade Assembly
#181TSXLBD38
3/8” Pusher Head
Assembly
#181TSXLP38
Suction Foot
#181SUCCUPFT
USER MANUAL
Produktspezifikationen
| Marke: | Garde XL |
| Kategorie: | Schneidemaschine |
| Modell: | TSXL38 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Garde XL TSXL38 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schneidemaschine Garde XL
6 August 2025
6 August 2025
6 August 2025
6 August 2025
Bedienungsanleitung Schneidemaschine
- Venga
- ICES
- Makita
- MPM
- Tristar
- Gourmetmaxx
- Maruyama
- Beper
- Jokari
- Dremel
- Presto
- Gastronoma
- Kleva
- Ambiano
- Brandson
Neueste Bedienungsanleitung für -Kategorien-
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025
6 August 2025