Geemarc AmpliDect 295 AD Bedienungsanleitung
Lies die bedienungsanleitung für Geemarc AmpliDect 295 AD (2 Seiten) kostenlos online; sie gehört zur Kategorie Telefon. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu Geemarc AmpliDect 295 AD oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
1 2 3 4
QUICK USER GUIDE
!!! Please refer to our website: www.geemarc.com for an
up to date user guide, as there may be important updates
and changes you need to be aware of !!!
CAUTION: Use only the battery pack provided. There may
be a risk of explosion if a wrong type of battery is used for
the handset. Do not subject the battery pack to extreme
high or low temperatures or low pressure at high altitude
during use, storage or transportation. Disposal of battery
pack into fire or a hot oven, or mechanically crushing or cutting
or the battery pack can result in an explosion. Subjecting the
battery pack to an extremely high temperature environment,
or extremely low air pressure can result in an explosion, or
leakage of flammable liquid or gas.
Normal operating temperature for the product (e.g. 0
o
C~40
o
C).
Use only the adapters and battery pack listed below.
Power adapter information: output: 6V DC 0.45A,
2.7W. Vtech Telecommunications Limited.
Model: VT05EEU06045 (EU), VT05EUK06045 (UK)
Rechargeable Battery Pack: Model: NI-MH
AAA500x2. 2.4V, 500mAh. Corun.
Base
Handset
Connectionbase
Connectionofadditionalhandset(Option)
PACKAGE CONTENTS
1 Telephone base, 1 Cordless handset, 1 Power adapter, 1
Telephone line cord, 1 NiMh battery pack ,1 Quick user guide.
INSTALLATION
Connecting the telephone base
Connect the telephone line cord to the telephone line socket
(A) and to the telephone wall socket (B).
Connect the lead from the power adapter to the small round
socket on the base (C), then plug-in the power adapter to a
mains outlet socket (D).
Note: Only use the power adapters supplied with the phone.
Connecting the handset battery
Remove handset battery cover.
Connect the short lead from the
battery pack into the socket inside
the battery compartment.
Carefully fit the battery pack as shown.
Align the battery cover flat against the battery compartment,
and then slide it towards the center of the handset until it
clicks into place.
Charge the batteries
Charge the batteries for at least 16 hours when charging for
the first time.
OVERVIEW
Telephone Base
1- /HANDSET LOCATOR
While the phone is idle, press to page all handsets.
2- IN USE
ON when handsets are in use, or when the telephone
answering machine (TAM) is answering an incoming call.
ON when a handset is being registered.
Flashes when there is an incoming call or when handsets are
being deregistered.
Flashes when another telephone is in use on the same line.
3- MESSAGE COUNTER
Flashes when there is an incoming call.
4-
/SKIP : Press to skip a message.
5- VOL (
)
During message playback, press to increase the listening
volume. While in idle mode, press to increase the base ringer
volume.
6-
/PLAY/STOP
Press to start or stop message playback.
7-
/ANS ON
Press to turn the TAM on or off.
8-
/DELETE
Press to delete the message currently playing.
Long press to delete all old messages when the phone is not
in use.
9- VOL (
)
Press to decrease the listening volume during playback. In
idle mode, press to decrease telephone base ringer volume.
10-
/REPEAT
Press to repeat a message.
Press twice to play the previous message.
Handset
11- EARPIECE
12. LCD DISPLAY
13. CHARGE LIGHT (
)
ON when the handset is charging.
14. MENU/OK (
)
In idle mode: Press to access the main menu.
In sub-menu mode: Press to confirm the selection.
During a call: Press to access Intercom / Phonebook /
Redial list / Call list.
15. UP/CALL LIST (
)
In idle mode: Press to access the call list.
In menu mode: Press to scroll up the menu items.
In phonebook list / redial list / call list : Press to scroll up
the list.
In editing mode: Press to move the cursor one character
to the left.
During a call: Press to increase the listening volume.
During ringing: Press to increase the ringer volume.
16. TALK ON (
)
In idle / pre-dial mode: Press to make a call in earpiece
mode.
In phonebook / redial list / call list: Press to make a call
from a number stored in the phonebook in earpiece mode.
During ringing (incoming call): Press to answer a call in
earpiece mode.
17. DOWN/REDIAL LIST (
)
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In phonebook list / redial list / call list: Press to scroll down
the list.
In editing mode: Press to move the cursor one character to
the right.
During a call: Press to decrease the listening volume.
During ringing: Press to decrease the ringer volume.
18. SPEAKERPHONE (
)
In idle /pre-dial mode: Press to make a call in speakerphone
mode. Press again to switch to earpiece mode.
In phonebook list / redial list / call list: Press to make a
call to the selected entry in the list in speakerphone mode.
Press again to switch to earpiece mode.
During ringing: Press to answer a call in speakerphone
mode. Press again to switch to earpiece mode.
19. MICROPHONE
20. VOLUME BOOST (
)
During a call
: Press to switch on the VOLUME BOOST
function. Press again to switch off VOLUME BOOST.
21. CANCEL/MUTE ( )
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous menu.
In sub-menu mode: Press and hold to go back to idle screen.
In editing /pre-dial mode: Press to delete a character /digit.
In editing / pre-dial mode: Press and hold to delete all the
characters / digits.
During a call: Press to mute / resume the microphone.
During ringing: Press to silence the handset ringer.
In idle mode: Press to cal (intercom) another handset.
22. TALK OFF (
)
During a call: Press to end a call and go back to screen.
In menu /editing mode: Press to go back to previous menu.
In menu / editing mode: Press and hold
to go back to idle
screen.
In idle mode: Press and hold
to power off the handset.
Press and hold
to power on when it is off.
23. ALPHANUMERIC KEYPAD, STAR
( ), HASH ( )
In predial or editing mode: Press to insert a digit / character
/
/
.
key in idle mode: Press and hold to enable or disable
the keypad lock.
key in idle mode: Press and hold to turn on/off the
ringer.
0 key in idle / pre-dial mode / number editing mode:
Press and hold
to insert a pause.
24. R
During a call: Press to answer another incoming call (if you
are subscribed to a Call Waiting Service from your network
service provider).
25. PHONEBOOK (
)
In idle mode: Press to access the phonebook.
Phone settings are always set the same way:
Press Menu/OK
button to open the main menu.
Then use the ▼▲buttons to select an entry and confirm it by
pressing the Menu/OK
button.
The factory preset PIN code is 0000
Example:
Set the language on the base
Press MENU / OK,
then select ▼▲language, press
MENU / OK
, then select ▼▲desired language and
then press MENU / OK
to confirm.
Set the language on the handset
Press MENU / OK
, then select ▼▲HS settings, press
MENU / OK
, then select ▼▲language, press MENU
/ OK
, than select ▼▲desired language and then press
MENU / OK
to confirm.
MENU SETTING
Handset
PHONEBOOK
►VIEW LIST
under an entry: ► ► ►ADD VIEW EDIT ►DELETE
►DELETE ALL ►PB STATUS ►FASTDIAL
CALL LIST
►VIEW LIST
under an entry: ►ADD TO PB ► ►DELETE DELETE ALL
►DETAILS ►CATEGORY
BS SETTINGS
► ► ► ►BS RINGER RING VOLUME DELETE HS DIAL
MODE ►FLASH TIME ►CHANGE PIN
5 6 7 8
HS SETTINGS
►RING SETUP ►TONE SETUP ►SELECT BASE
► ►LANGUAGE RENAME HS ►HS DISPLAY ►AUTO
ANSWER
DIRECT MEM : ►M1-M2-M3-M4
DATE & TIME
►DATE FORMAT ►TIME FORMAT ►SET TIME ►SET
DATE
ALARM : ► ►ON OFF
REGISTRATION : ►BASE 1, 2, 3 or 4
DEFAULT : ►PIN? 0000 by default
ANS. MACHINE
►MSG PLAYBACK ►DELETE ALL ► ►MEMO TAM
ON/OFF
►TAM SETTINGS (ANSWER MODE, TAM LANGUAGE,
OGM SETTINGS, ANSWER DELAY, RECORD TIME,
COMPRESSION, BS SCREENING, REMOTE ACC,
CHANGE PIN)
HANDSET REGISTRATION
Note: Handset and telephone base are pre-registered.
It is possible to register a further 4 handsets to the telephone
base (5 handsets can be registered to the telephone base
including the handset supplied).
In the case of re-registration, the PIN code is 0000.
Registration a handset
On Handset: Press MENU/OK
select▼▲ REGISTRATION.
Press
MENU/OK
select ▼ ▲ BASE (1-4), Press
MENU/OK
enter 4 digits PIN for the base PIN.
At the same time: press and hold
/ HANDSET
LOCATOR
on the base to enter the registration mode.
After a short delay, a bleep will sound to confirm registration
is successful. The handset display will return to idle mode
and show the new handset number. The base display will
also go back to idle mode.
De-Registration
On Handset
: Press
MENU/OK
, select ▼ ▲ BS
SETTINGS, press
MENU/OK
, select ▼▲DELETE HS,
press MENU/OK
enter PIN 0000, press
MENU/OK ,
select ▼▲one of the handsets that you want to de-register,
press MENU/ OK
to confirm.
INTERNAL CALL (INTERCOM)
Press
C/MUTE
, Enter the desired handset number
on keypad.
NOTE:
If only one cordless handset is registered to the
base station, internal call will not be available.
Call All Handsets
Press C/MUTE , Enter "9" on keypad.
Transfer an External Call
Press MENU/OK , select ▼▲INTERCOM, Press
MENU/OK
.
Enter the desired handset number on keypad.
After connection quit the call on handset.
Conference Call
Press MENU/OK , select ▼▲ INTERCOM, Press
MENU/OK
.
Enter the desired handset number on keypad.
After connection press and hold
until CONFERENCE is
shown.
NOTE: Any party can hang up during a conference call. The
remaining party / parties will still be connected to the external
call.
PHONEBOOK
The AMPLIDECT295 can store up to 50 names and numbers
in the phonebook. Each phonebook entry can have a
maximum of 20 digits for the phone number and 12
characters for the name. It is possible to set a ringer tone
for each phonebook entry.
Phonebook entries are stored alphabetically by name.
To Add new entry
In idle mode :
Press MENU/OK
, select ▼▲PHONEBOOK to access
the phonebook list ( or empty),
Press MENU/OK
to select ADD.
Press MENU/OK
to select NAME ,enter the name.
Press MENU/OK
to select NUMBER, enter number.
Press MENU/OK
and ▼▲ to select the desired
ringtone for your phonebook entry.
Press MENU/OK
to save.
DIRECT MEMORY BUTTONS (M1 ~ M4)
It is possible to pair the telephone base to additional handsets
from other telephone handsets in the AMPLIDECT295 range
(for example the PhotoDECT295 and EMERGENCY295).
On Handset: Press MENU/OK
, select ▼▲DIRECT
MEM,
Press MENU/OK
, select ▼▲ M1-M2-M3-M4,
Press MENU/OK
, enter number then OK.
TELEPHONE ANSWERING MACHINE
(TAM)
The AMPLIDECT295 includes a TAM to record messages
from unanswered calls (when it is switched on). It is possible
to store up to 59 messages (with a total recording time of
approx.15 minutes). As well as recording incoming messages,
you can record memos for other users of your phone.
Press
/ANS ON/OFF to switch the answering machine
ON or OFF.
REMOTE OPERATIONS
It is possible to switch the TAM on and off and listen to
stored messages remotely from another tone-dialling phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts
playing OGM, press
.
3. Enter your 4-digit Remote Access PIN. Refer to the main
user guide on how to set up your own remote access PIN
(default PIN is 0000).
4. Press the following keys to carry out your desired function.
key
Functions
While message is
not pla
y
in
g
While message is playing
2
Delete the current message
pla
y
back
4
Repeat the current message
from the beginning. Press
twice to skip backward to the
p
revious messa
g
e.
5
Play the message
6
Skip forward to play the next
messa
g
e
7
Turn on the answering
machine
8
Stop the current message
p
la
y
back
9
Turn off the answering
machine
*
Enter the 4-digit
remote access PIN
NOTE:
When the TAM memory is full (and answer mode is set to
ANS & RECORD), the answer mode will automatically
change to ANSWER ONLY.
The TAN will automatically revert to ANS & RECORD mode
after some messages are deleted.
NOTE: It is not possible to deleted new (unplayed) messages.
TECHNICAL SPECIFICATIONS
Basic Information
Valid Range Indoor : 50m
Outdoor :300m
Handset
Operatin
g
time
Standby time : 100 hours
Talk time : 10 hours approx.
RF Paramete
r
Frequenc
y
1.88 GHz to 1.9GHz
Nb Channels 10
RF power < 250mW
Power Suppl
y
Telephone base Input 100-240V 50/60Hz;
output DC6V 0.45
A
, 2.7W adapter
Charger Input 100-240V 50/60Hz;
output DC6V 0.45
A
, 2.7W adapter
Handset 2.4V ; 500mAH rechargeable NiMh
batter
y
pack
MAINTENANCE
Clean the surface of the housing with a soft, fluff-free cloth.
Do not use any cleaning agents or solvents.
GUARANTEE
From the moment your Geemarc AMPLIDECT
TM
295 is
purchased, Geemarc guarantee it for the period of two
years. During this time, all repairs or replacements (at our
discretion) are free of charge. Should you experience a
problem then contact our help line or visit our website at
www.geemarc.com.
The guarantee does not cover accidents, negligence or
breakages to any parts. The product must not be tampered
with or taken apart by anyone who is not an authorized
Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT :
YOUR RECEIPT IS PART OF YOUR
GUARANTEE AND MUST BE RETAINED AND PRODUCED
IN THE EVENT OF A WARRANTY CLAIM.
Please note : The guarantee applies to the United
Kingdom only.
DECLARATIONS:
UKCA Directives
Geemarc Telecom SA hereby declares that this
AMPLIDECT
TM
295 is in compliance with the essential
requirements and other relevant provisions of the Radio
Equipment Directive 2014 / 53 / UE.
The UKCA declaration of conformity may be consulted
at www.geemarc.com
Electrical connection: The apparatus is designed to
operate from a 230V 50Hz supply only. (Classified as
hazardous voltage according to EN62368-1 standard). The
apparatus does not incorporate an integral power on / off
switch. To switch off the apparatus, disconnect the power
adaptor.
When installing the apparatus, ensure that the mains power
socket is readily accessible.
Telephone connection:
Voltages present on the
telecommunication network are classified TNV-3
(Telecommunication Network Voltage) according to the
EN62368-1 standard.
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment)
has been put in place for the products at the end of their
useful life are recycled in the best way.
When this product is finished with, please do not put it in
your domestic waste bin. Please use one of the following
disposal options:
- Remove the batteries and deposit them in an appropriate
WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a
new one, they should accept it.
Thus if you respect these instructions you ensure human
health and environmental protection.
For product support and help visit our website at
www.geemarc.com
E-mail : help@geemarc.com
telephone 01707 387602
lines are open 09h00 to 16h00 Mon to Fri
Parc de l’Etoile, 2 Rue Galilée, 59760 Grande-Synthe,
France.
Made for Geemarc Telecom S.A. in China
QUGAMPLIDECT295_En_A3_V1.8
Produktspezifikationen
| Marke: | Geemarc |
| Kategorie: | Telefon |
| Modell: | AmpliDect 295 AD |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Geemarc AmpliDect 295 AD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Telefon Geemarc
8 August 2025
8 August 2025
8 Juni 2025
3 September 2024
21 August 2024
20 August 2024
18 August 2024
18 August 2024
17 August 2024
17 August 2024
Bedienungsanleitung Telefon
- Snom
- Wiko
- Bang And Olufsen
- TRENDnet
- CSL
- Realme
- DrayTek
- Teledex
- EnGenius
- Hama
- BlackBerry
- Akuvox
- Spectralink
- Flex
- 4family
Neueste Bedienungsanleitung für -Kategorien-
4 August 2025
4 August 2025
3 August 2025
1 August 2025
1 August 2025
31 Juli 2025
31 Juli 2025
29 Juli 2025
28 Juli 2025
28 Juli 2025