Genie GCB01HD Bedienungsanleitung
Genie
Nicht kategorisiert
GCB01HD
Lies die bedienungsanleitung für Genie GCB01HD (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 17 Bewertungen. Hast du eine Frage zu Genie GCB01HD oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
GCB01HD
HD Ground Loop Isolator
User Manual
GCB01HD - HD Ground Loop Isolator
2
1. Introduction
2. Key Features
2. Technical Specication
3. Board Diagram
The GCB01HD is a passive high efcient and reliable ground loop isolator for HDCVI / HDTVI / AHD /
Analogue Video Signal over Coaxial Cable. It’s magnetic isolation technology adoption can effectively
solve the interference issues caused by different ground potential during the signal transmission, which
improves the video anti-interference capability and effectively eliminate tearing and scrolling pictures. The
devices embedded lightning protection system improves the stability.
• Passive, No Power Required
• Eliminate Video Distortion caused by Ground Loops Circuit
• Eliminate issues such as Image Tearing, Cross-Talk, Rolling etc.
• Fully Compatible with HDCVI, HDTVI, AHD, Analogue Video Signals
• Built-In 800v Insulated Voltage
• Excellent Anti-interference Capability, Superior Lighting-Protection, ESD and EFT Capability
• Support Unibody, with Small Volume
Model Number GCB01HD
Insertion Loss 0.5dB
Frequency Response 5Hz-70MHz
Input Impedance 75Ω
Output Impedance 75Ω
Isolation Voltage 800V (Minimum)
Isolation Resistance 100M Ω
Surge Protection Level3 Per IEC61000-4-5
ESD Protection Contact Discharge: 6KV, Air Discharge: 8KV, Per IEC61000-
4-2
Operation Temperature -10℃ ~ 55℃
Storage Temperature -40℃ ~ 85℃
Humidity 0~95% (Non-Condensing)
Dimensions (L × W × H) 41 x 24.5 x 21.6 mm
Weight 51g
*Design and Specications are subject to change without notice.
BNC Female Input BNC Male Output
GCB01HD - HD Ground Loop Isolator 3
4. Application Diagram
5. Installation Steps
6. Troubleshooting
1. Turn off the power supply of all the related devices before the installation to prevent damage to the
product.
2. Check if the coaxial cable and other transmission lines are occupied by other devices.
3. Connect the Male BNC of the device to the NVR.
4. Connect the Female BNC of the device to the camera with coaxial cable.
5. Check if the device is working and that the installation is correct. Make sure all connections are
reliable.
6. Power on the system.
7. Make sure the system can work regualrly.
Please follow below if the device doesn’t work:
• Please make sure you have followed the instruction to install the device.
• The transmission distance depends on the signal source and cable quality, please do not exceed the
maximum transmission distance.
• Please replace a failure device with a proper one to check if the device is damaged.
• If the problem still exists, please contact the dealer.
NOTE
Please use RG59 or above Coaxial Cable or CAT5e/6 Cable to reach the longest transmission distance.
LCD
Monitor
NVR
GCB01HD
Camera Coaxial Cable
Produktspezifikationen
| Marke: | Genie |
| Kategorie: | Nicht kategorisiert |
| Modell: | GCB01HD |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Genie GCB01HD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Genie
21 August 2024
21 August 2024
29 Juli 2024
22 Juli 2024
21 Juli 2024
19 Juli 2024
9 März 2024
27 Januar 2024
Bedienungsanleitung Nicht kategorisiert
- SoundTube
- Nostalgia
- Sky
- Reginox
- Leica
- Berker
- 9.solutions
- Horizon
- IOttie
- MADE
- JK Audio
- Nexera
- Schoeps
- Twelve South
- Prowise
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025
19 Juni 2025