Glide Gear G2G 1000 Bedienungsanleitung
Glide Gear
Stativ
G2G 1000
Lies die bedienungsanleitung für Glide Gear G2G 1000 (6 Seiten) kostenlos online; sie gehört zur Kategorie Stativ. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 12.5 Bewertungen. Hast du eine Frage zu Glide Gear G2G 1000 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/6
G2G 1000
For more informaon please visit our website: www.glidegear.net
Descripon
The G2G 1000 is a mechanical gimbal for your motorized gimbal.
Motorized gimbals are great at smoothing small jiers from steps but there is so
much they can do to smooth out bounces of bigger amplitudes, when running for
instance. Most motorized gimbals can pan and lt by simply pressing a buon or a
joysck but panning or lng with a motorized gimbal does not have the same
“oang” feeling that you can have on a tradional mechanical stabilizer. The
G2G 1000 can remedy that by allowing you to have almost full control on the pan
and lt of your gimbal give you more freedom to create your shots. Combine the
G2G 1000 and a vest and arm system such as the Glide Gear G2G Vest and G2G
Vest Plus to get even smoother shot while shoong long without feeling fagued.
Compability
• Compable with most motorized gimbals including DJI single handled
Roni S, DJI RS2, Zhiyun Tech Crane 3, Weebill S and Crane 2 or Moza Air –- - - -
3 or Aircross
• Compable with any vest and arm system with a pin diameter smaller
than or 22.5mm7/8”
• Compable with any Camera/Gimbal setup up 10lbs
Warning
The overall G2G 1000 weight capacity is condioned by the weight capacity of
the vest and arm system the G2G 1000 is used with.
COMPONENTS
For more informaon please visit our website: www.glidegear.net
(A
(B) Fulcrum point
Clamp
(C) Mounng Plate
(E) Telescopic
Pole
(J) 3/8 16 to 1/4 20 adapters- -
(F) Stand Plate
(G) Stand
(H) 8oz counter weight (x12)
(I) 4oz counter weight (x14)
(L) C Stand adapter-
(D) Main Pole
Assembling your G2G 1000
1
2
ASSEMBLY
3
For more informaon please visit our website: www.glidegear.net
Mount the G2G 1000 on your vest
and arm system by sliding the han-
dle (A) onto the pin at the end of
the arm.
1
Assemble the Stand (G) to the fe-
male end of the Telescopic Poles (E)
using the mounng screw on the
Stand Plate (F)
4
4
Lock the clamp connecng the
2 Telescopic Poles (E)
Note: The pin must have a diameter
no greater than (22.5mm)7/8”
2
Lock the gimbal posion on along
the Main Pole (D) using the gimbal
clamp (B)
Produktspezifikationen
| Marke: | Glide Gear |
| Kategorie: | Stativ |
| Modell: | G2G 1000 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Glide Gear G2G 1000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Stativ Glide Gear
8 Juni 2025
5 September 2024
4 September 2024
Bedienungsanleitung Stativ
- 3 Legged Thing
- IFootage
- Tiltall
- Laserliner
- Moza
- MOVE'N SEE
- Explore Scientific
- Cullmann
- FLOWCINE
- KRUX
- Sachtler
- Camgear
- Joby
- Easyrig
- GVM
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025