Glide Gear OH 150 Bedienungsanleitung

Lies die bedienungsanleitung für Glide Gear OH 150 (1 Seiten) kostenlos online; sie gehört zur Kategorie Stativ. Dieses Handbuch wurde von 6 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 3.5 Bewertungen. Hast du eine Frage zu Glide Gear OH 150 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

OH 150—USER MANUAL

Fig. A

For more informaon please visit our website: www.glidegear.net

Setup

Track Holder with

light stand adapter

Accessory Holders

(1)The OH 150 includes 2 kinds of spacers:

 2x Track Holders: the end caps are facing in the opposite direc-

on than the plate with the 1/420 and 3/816 mounng --

holes.

 3x Accessory Holders: the end caps are facing in the same di-

recon than the plate with the 1/420 and 3/816 mounng --

holes.

A Track Holder is pictured in Fig A. An Accessory Holder is pictured in

Fig. B.

(2) Assemble 2 separate track secons of equal length. The OH 150 comes with 6 x 4 secons so the maximum

length for the OH 150 is 12 ( 2x 12 secons). Make sure to secure the connecon between each track secon

using the supplied hardware

(3)Mount the 2 supplied light stand adapters at the boom of the Track Holders as seen in Fig. A.

Fig. B

(5)Mount the supplied camera plaorm at the boom of one of

the Accessory Holder. See Fig. B.

(6)Place the Accessory Holder at the desired locaon on along

the track. The holders end caps must be facing down. Make ’

sure the track snaps on the end caps.

(7)The OH 150 comes with the GG 33 ball head. Mount the ball

head to the camera plaorm to adjust the camera angle.

(8)The OH 150 comes with a total of 3 Accessory Holders. Use them to mount mulple cameras, lights, mics,

monitors..etc.

(4)Place the 2 Track Holders at the ends of the track. Press in the track

into the end caps unl you hear a snap.

Track Holder with

light stand adapter

Fig. C

Produktspezifikationen