Hager WGCL2D1N Bedienungsanleitung

Lies die bedienungsanleitung für Hager WGCL2D1N (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu Hager WGCL2D1N oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

www.hager.com

Safety instructions

Electrical equipment must only be installed and assembled by a qualified

electrician in accordance with the relevant installation standards, regulations,

directives and safety and accident prevention directives of the country.

Failure to comply with these installation instructions may result in damage to

the device, fire or other hazards.

Function/Correct use

-Mechanical double pole switches/control switches for electrical installations in

buildings.

-For switching hard-wired electrical appliances.

-With earthing contact for bonding connected loads to protective earth.

-Control switches equipped with LED indicator per each rocker.

-For the flush-mounted installation in standard wall boxes (recommended wall box

depth ≥ 35 mm). Attention: When installed in metal wall box, the box must be

connected with earth directly.

-Only suitable for use in indoor areas with no drip and no spray water.

Technical data

Rated voltage: 250 V~

Frequency: 50/60 Hz

Rated current: max. 20 AX

Conductor cross-section of screw terminals: max. 3 x 2,5 mm²

Distance of fixing holes: 60.3 mm

Switch compliance: BS EN 60669-1, IEC 60669-1

20AX DP switches

20AX DP control switches

Hager Muse / Hager Inspire

Installation manual

Produktspezifikationen