Hikvision DS-UPS3000 Bedienungsanleitung

Lies die bedienungsanleitung für Hikvision DS-UPS3000 (2 Seiten) kostenlos online; sie gehört zur Kategorie Unterbrechungsfreies Stromversorgungssystem. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu Hikvision DS-UPS3000 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

The buzzer beeps every

8 seconds

The buzzer beeps every

1 second

To test the UPS on battery mode, cut off the utility and UPS observes

“backup indicator” lights, then your PC can continue working normally.

MODEL

2000VA 3000VA

8

12V /9Ah x 2

12V /9Ah x4

Ba

Ba

Ba

BaBatt

tt

tt

tttte

e

e

eery ra

ry ra

ry ra

ry rary rati

ti

ti

titing

ng

ng

ngng

Communication software download address:

httpswwwhikvisioncomensupportdownloadsoftware://../////

upssoftware-/

COMMUNICATIONSOFTWAREDOWNLOAD

/:----SNPNCC6257003308D1008140

110V: 110/115/120VAC; 220V: 220/230/240VAC

110V: 85~145 VAC; 220V: 175~275VAC

110V: 110/115/120VAC; 220V: 220/230/240VAC

110V: 102~132 VAC; 220V: 200~240VAC

45~65Hz

Push the switchfor3seconds , (the LCD displayinput & output voltage).

then the UPS will be ready for operation.

1. Self-testing while switching on

2. Silence Function

In Battery Mode, shortly press the switch will enable or disable the buzzer.

But when UPS is low battery or overloaded, the buzzer can not be silenced.

3. Autorun

In DC mode, UPS discharges till battery run out and cut off, UPS autorun

when AC recover.

4. Overload protection

When UPS is overloaded on operation, it will cut off the output

automatically if it is not solved by the user in time.

5. Low battery shut off

When the battery is about to be exhausted, UPS will shut down automatically

to protect battery s life.

6. Switching off

1) AC Normal

UPS will cut off the output and goes to AC standby mode by pressing the

switch for 3 seconds.

2) Backup

Press the switch for 3 seconds, the UPS will be turned off after a long beep.

The trouble shooting chart covers most of the difficulties that you may

encounter under normal working conditions. If the UPS fails to operate

properly, please review the following steps before calling the service center.

1. Is the UPS plugged into a correct working outlet?

2. Is the line voltage within the rating specified?

3. Is the fuse or breaker / ciruit protector on back panel open?

1. Model No. & Serial No.

2. Date of problem.

3. Full description of problem.

Produktspezifikationen