Hobbywing QuicRun 2435 G2 Bedienungsanleitung

Lies die bedienungsanleitung für Hobbywing QuicRun 2435 G2 (1 Seiten) kostenlos online; sie gehört zur Kategorie ferngesteuertes Spielzeug. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 11 Bewertungen. Hast du eine Frage zu Hobbywing QuicRun 2435 G2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

UserManua l

Bs ruhless SpeedConrolletr

Qc toruiRunMo

HW-SM312DUL-20161013

Instruction

Specifications

Gear Selection (IMPORTANT!)

Maintenance

Safety Notes

Installation & Connection

Tnk yhaou forchasinhe “Q”r pug tUICRUN 2435-G2/3656/4074 brushless mot) for Rca or(sC rs!

Thhhowerystemavery rsreaiarfor e ig p s cn be dangeou, so please d ths mnual caefully bee ngusi

ansttlyd ric followoratrocedure the peing pes in us. t Ian thwavcontrove he no ol er the

instlad intencroduct acctfor altiousn, e anmanae of is ptht, no liabiliy shall be assumed noreped

dass omage, selosr cos resultirsrcBistsng fom the use of thi podut. esde, e wown thrighto e t

crucignhathnge e podt des, aaranceppe, funs ad openctionrational requirementhoutny s wit a

ncas.otifition

Thisr podunoorcs t it a t itoyn ad is f ubatnovyse y adults nd ees er 14 onl, so plese keep t ofait ou

chiren’s reachPskld. leae eep ting poihe flowolntsdrim in min; othewise t

amroduct y daage the p

ancassand usrrtye pope lo d physicritss. al injues o uer

1. Never lee this product unsupervised when it is powered on. If any problem occurs, the av

product will cause a fire and jeopardize peripheral devices.

2. Please insure all the wires and interconnecting pieces are well insulated before the connection,

as short circuits may damage the product.

3. Please read through manuals of each power plant and chassis to ensure the power match is

rational before the use, as the incorrect power match may result in overload and eventually

damage the motor.

4. Prohibit the full throttle operation before installing the pinion. Under non-loaded circumstances,

over-high RPM may cause damage to the motor.

5. Make sure all the parts are well connected, as misconnection or poor connection may lead to

abnormal control, damage or other unpredictable problems.

6. Never let the temperature of the motor shell exceeds 90°C (194°F), otherwise the motor will be

damaged and the rotor will be demagnetized.

To Install tMotor:he

1. Two types of screws used for installation: 2.6mm or 3mm in diameter

(M2.6 / M3: 4PCS for each size) for Motor 2435-G2, 3mm in diameter (M3) for Motor 3656 / 4074.

2. Depth of each type of screw hole:

2435-G2≤4mm, 3656≤5mm, 4074≤7mm.

3. Before mounting the motor onto the vehicle, please ensure that all the screws are applicable to

avoid damaging the motor. In general it’s okay to use screws, 2.6mm or 3mm in diameter

(M2.6 / M3) and less than 6mm in length for installing Motor 2435-G2; 3mm in diameter (M3) and

shortet ir han 8mm

n h legtnfaor instllmeiniag Moto;r 3656 3mm in dter (M tm 3) andlesshan 10m

in length for mounting Motor 4074; and the specific length is up to the respective chassis size.

To Connthect e Motor:

Three input / power wires need to be plugged into the motor, and they often differ in colors: (phase) wire A is Blue, (phase) wire B is Yellow and (phase) wire C is Orange. When connecting ESC output wires to

motor wires, please ensure the connections are: A-A, B-B and C-C.

Not e 1:

As definitions of triple-phase (#A / #B / #C) are different among manufacturers, connect the motor and the ESC according to the above method may cause the motor rotates in the opposite direction,

at this time you only need to swap any of two wire connections.

Check up:

Recheck the installation and all the connections carefully before turning on the power.

Not e 2:

(C=Current; O.D. =Outer Diameter; D=Diameter; M=Maximum; L=Length; W=Weight)

1. The maximum output power is the value obtained when the voltage is 7.4V / 22.2V (7.4V for Motor 2435-G2 & Motor 3656, 22.2V for Motor 4074), the ESC timing is 0°. It is neither the maximum input power

nor the rated power. The calculation formula used here is: RPM x Torque / 9550.

2. The value of the maximum output power is always lower than the value of the input power. Therefore, it’s meaningless to compare the maximum output power value mentioned in the form above with

the input power value of motors of other brands. Besides, values in the form above may differ from the data of other factories because of different test benches.

3. The input current at the point of the maximum output p

ower has some guiding significance for the load configuration and the ESC selection, here we strongly suggest users NOT make the load quota

bigger than the maximum output power point (that means please don’t make the input current larger than the current of the maximum output power point.)

It veryortantct treonratiois impt o selehe asable gear , as inappropriatctnayugreaoss tse seleio m case t lo uers.

Treforesseleccorrecatio aordinthe, pleae t e tht ger raccg o e ollthfowoining pts!

O Temrature pengratipe

During the operation, the motor temperature should be lower than 90°C (194°F). Temperatures above 90°C will weaken the magnet & may partly melt the coils and eventually damage the ESC (because of

strong current). Therefore, the most effective way to prevent over-heat is to select the right gear ratio.

Priiplnce f eaoGr Selectnio

To avoid potential risks, caused by overheating, which may lead to ESC/motor damage or malfunction, please start with very small pinion sizes and check ESC & motor temperatures at multiple times

throughout a run. This is the only way to guarantee that you are not causing excessive heating. If motor and the ESC temperatures remain stable and low in the running, then you can slowly increase the

pinion size while again monitoring the temperatures to determine the safe gearing for your vehicle, mo

tor, climate and track conditions. Because these variables can change or be modified, so please keep

monitoring ESC & motor temperatures to protect your electronics from damage.

For prolonging the motor life and raising its efficiency, we recommend users to check the bearing, and clean the motor regularly; and the specific interval depends on the usage frequency and terrains. Please

follow the picture (of Motor 4074) below to install the motor, and disassemble in reserve order.

Not e 3:

Because of special craftsmanship, neither Motor 2435-G2 nor Motor 3656 can be disassembled. For avoid damaging the motor, please do not try to dismantle these 2 motors.

QUICRUN-2435-G2-4500KV304040014500KV2~3S0.04981.5A150W33A24.0x36.52.30x142731:18&1:16 On / Off-road / Truggy / Monster

QUICRUN-3656-3800KV304041003800KV2~3S0.00552.3A420W110A36.0x56.03.17x1642321:10 On / Off-road / Truggy / Monster

QUICRUN-4074-2000KV304042002000KV2~6S0.00653.1A2600W160A39.8x73.85.00x2043931:8 Truggy / Monster

ModelPN

KV

(No-load)

No-load

Current

Max.

Output

Power

C. at the

point of

M.O.P

O.D.*

L (mm)

D of the shaft*

L of the

projecting part (mm)

Poles

W (g)

ApplicableLiPoR. (Ω)

*

For hi-resolution, please visit our website at: www.hobbywing.com

1, Assemble the motor rotor;2, Install the end play adjusting spacer;

5, Fill in the front-end gap with these two

adjusting spacer(s);

Assemble this bearing

into the top cover

7, Assemble the four screws for fixing

the top cover;8, Picture of the assembled motor.

3, Assemble the bottom cover;

Note: pls align these two hole sites before

assembling

Note: the number of the spacer(s) used may vary

because of dierent tolerance(s).

6, Assemble the

top cover;

Note: pls align those hole sites

before assembling

Motor Rotorx1pc

Bearingx1pc

Front end Bellx1pc

Adjusting Spacer for

the front end playx2pcs

Motor Shellx1pc

Back end Bellx1pc

Screws for Fastening the

back end Bellx3pcs

(M2.50x3.0mm)

Adjusting Spacer for

the rear end playx1pc

Screws for fixing

the front end

Bellx4pcs

(M3.0x5.0mm)

1234

5678

4, Assemble the three screws for

fastening the bottom cover;

Produktspezifikationen