Honeywell CT51N1007 Bedienungsanleitung

Lies die bedienungsanleitung für Honeywell CT51N1007 (16 Seiten) kostenlos online; sie gehört zur Kategorie Thermostat. Dieses Handbuch wurde von 28 Personen als hilfreich bewertet. Hast du eine Frage zu Honeywell CT51N1007 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

/ 16 PDF

Owner’s Manual

English: Page 1

Mode d’emploi

Français : Page 6

Manual de Uso

Español: Página 11

CT50 Series Thermostat

® U.S. Registered Trademark. Patents pending.

Copyright © 2019 Honeywell International Inc.

All rights reserved.

Read and save these instructions

M23786

MERCURY NOTICE

If your old thermostat contains

mercury, contact your local waste

management authority for proper

disposal instructions.

TURN OFF POWER at heating/cooling system (or fuse/circuit-breaker panel).

Remove cover and thermostat, but leave wallplate with wires attached.

Temperature Control Range

• 45°–95°F (7°–35°C)

• 35°–85°F (2°–29°C); select models; for garages or other outbuildings.

Is there a sealed tube containing mercury?

If so, see mercury notice below.

Leave wallplate in place.

Old thermostat

Cover

Check package contents:

• Thermostat

• Wall anchors & screws (2 each)

• Wire labels

Before you begin, make sure you have:

• No. 2 Phillips & small pocket

screwdrivers

• Hammer

• Level (optional)

• Pencil

• Drill and bit (3/16” for drywall, 7/32” for

plaster)

Getting started

Remove your old thermostat

Vertical Mount:

CT50 (24 Vac heating systems)

CT51 (24 Vac heating and cooling systems)

CT53 (750 mV or 12Vdc heating systems)

Horizontal Mount:

CT54 (24 Vac heating systems)

CT55 (24 Vac heating and cooling systems)

69-2040EFS-04

Produktspezifikationen