Honeywell HBD95S Bedienungsanleitung

Lies die bedienungsanleitung für Honeywell HBD95S (2 Seiten) kostenlos online; sie gehört zur Kategorie Überwachungskamera. Dieses Handbuch wurde von 43 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 22 Bewertungen. Hast du eine Frage zu Honeywell HBD95S oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Document 800-09587 – Rev A – 11/11

HBD9 Series Camera Quick Install Guide

800-09587 Rev A 11/11

Camera Overview

Installing the Camera

HBD9 Series cameras (HBD92S/HBD92SX/HBD95S/HBD95SX) can be installed on a

wall or ceiling indoors or outdoors.

Mounting the Camera

1.Find a suitable location for mounting the camera. The mounting surface must be

flat and capable of supporting the combined weight of the camera, sunshield,

bracket, and mounting ring (approximately 3.18 lb. [1.44 kg]).

2.Attach the mounting ring to the mounting surface using the four supplied 1-inch

(25.4 mm) self-drilling screws.

3.Attach the camera and bracket to the mounting ring using the four supplied

3/8-inch (9.52 mm) socket cap screws. Tighten the screws using the supplied hex

key.

Note For an outdoor wall mount installation, ensure that the notch in the base of the bracket is

facing down.

Positioning the Camera

You can position the camera to capture the desired field of view by adjusting the multi-

directional bracket. To change the camera position, loosen the bracket screws with

the supplied hex key, reposition the camera, and then tighten the screws.

Connecting the Camera

1.Connect the camera’s BNC video output to the video input on your monitor or

digital video recorder.

2.Connect the camera’s 12 V DC power output to a power supply appropriate for

your installation (24 V AC or 12 V DC).

Figure 1Video and Power Connections

Note

When the main video is connected to a terminated monitor or recording device, if the

second video out is also connected to a terminated monitor, the video will become darker.

For correct video level, ensure that only

one

video output is terminated with a 75 ohm load.

Configuring the Camera

Setting the Focus and Zoom

The focus and zoom controls are located on the underside of the camera.

Figure 2Focus and Zoom Controls*

To set the focus:

1.Loosen the focus set screw using the supplied hex key.

2.Turn the focus adjustment screw clockwise for near focus (N) or

counterclockwise for far focus (

∞).

3.Tighten the focus set screw to lock the focus setting.

To set the zoom:

1.Loosen the zoom set screw using the supplied hex key.

2.Turn the zoom adjustment screw clockwise to decrease zoom (W) or

counterclockwise to increase zoom (T).

3.Tighten the zoom set screw to lock the zoom setting.

Setting the LED Brightness

You can adjust the LED brightness level in night (B/W) mode. The LED brightness

control is located on the underside of the camera, next to the focus and zoom

controls. Unscrew the cap to access the control board.

Figure 3Camera Control Board

To set the LED brightness:

Turn the LED LEVEL adjustment screw either clockwise to increase the LED

brightness or counterclockwise to decrease the LED brightness.

Programming the Camera

You can program the camera using the onscreen display (OSD) menus. The menu

controls are located on the camera control board (Figure 3). Move the OSD controller

joystick up, down, left, or right to navigate through the menu options. Press the

joystick to execute (set) a selection or to enter a submenu (

 ).

Figure 4Setup Menu Structure

Sunshield

Mounting

Ring

Bracket

Notch

Video (BNC) - Yellow

Power (12 V DC) - Red

N

T W

Zoom Adjustment Screw

Focus Adjustment Screw

SETUP

LED LEVEL

VIDEO

TEST

OSD Controller

LED Adjustment Screw

2nd Video Out

<<SETUP MENU>>

LENS DC

EXPOSURE

WHITE BALATW

SSDR OFF

BACKLIGHT OFF

DNR3 ON

DAY/NIGHT EXTERN

SPECIAL

EXIT SAVE

1

2

3

4

5

6

7

8

9

LENS DC

EXPOSURE

WHITE BAL

SSDR

BACKLIGHT

SPECIAL

DAY/NIGHT

DNR3

BRIGHTNESS, SHUTTER, AGC,

SENS-UP, RETURN

ATW, OUTDOOR, INDOOR,

MANUAL, AWCSET

OFF, ON

OFF, BLC, HLC

ON, OFF

EXTERN, COLOR, B/W, AUTO

See Special Menu Structure.

Main Setup MenuMenu OptionsSubmenu

* The HBD92S(2.8–12 mm) controls are shown here.

The controls appear in reverse order on the HBD95S (5–50 mm).

Produktspezifikationen