Honeywell Performance H4W8PR2 Bedienungsanleitung

Lies die bedienungsanleitung für Honeywell Performance H4W8PR2 (2 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 50 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 7 Bewertungen. Hast du eine Frage zu Honeywell Performance H4W8PR2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

H4W8PR2 WDR 8 MP IR Rugged Dome Camera

Quick Installation Guide

Thank you for purchasing a Honeywell Performance Series

IP camera. Follow the instructions in this guide to install

and log in to your camera. For instructions on configuring

the camera, refer to the user guide on the CD that came

with your camera. If you require additional assistance, call

the number listed for your region on the back cover.

Warnings and Cautions

WARNING

To ensure compliance with electrical safety standards, this product is

intended for use with a Listed Power Adapter marked “Limited Power

Source” or “LPS” on the unit, output rated to 12 VDC, minimum 0.33 A,

TMA=60 deg C, or from Power over Ethernet (PoE) provided by Listed

Information Technology Equipment meeting IEEE 802.3af PoE standard.

CAUTION

The Ethernet connection is not intended to be connected to exposed

(outside plant) networks. Do not connect two power sources to the camera at

the same time.

CAUTION

Invisible LED radiation (850 nm). Avoid exposure to beam.

Important Safeguards

•

Read and keep these instructions

•

Confirm the installation surface can support at least three times the weight of the camera.

•

Do not apply power to the camera before completing installation.

•

Do not aim the camera toward a bright light source for extended periods to prevent damage to

the imager.

•

Avoid operating the unit under or close to unstable light sources (may cause flickering), or close

to fluorescent lamps or objects reflecting light.

•

Do not touch the camera lens.

•

Do not drop the camera or subject it to physical shock.

•

Do not use a strong or abrasive detergent when cleaning the camera.

•

Avoid operating or storing the unit in extremely humid, dusty, hot/cold environments, where

the operating temperature is outside the recommended range of -(-22°F to 140°F 30°C to

60°C).

Before You Begin

Before you begin, check that you have received all the parts listed below. If any parts are

missing or damaged, contact your dealer immediately.

•

Camera

•

Installation CD

•

Quick installation guide

•

Allen key - (Lwrench)

•

Self-tapping screws (×4)

•

Plastic anchors (×4)

•

Mounting template

CAUTIONInstallation and servicing should be performed only by qualified and

experienced technicians to conform to all local codes and to maintain your

warranty.

Mounting surface

Mounting template

Anchors

Camera assembly

Self-tapping screws

Dome cover

Locking screw

Allen key

Preparing the Mounting Surface

1.

Apply the mounting template to the mounting surface.

2.

Using the mounting template as a guide, drill three pilot holes in the mounting surface,

then hammer the supplied anchors into the holes.

3.

Drill a cable entry hole in the mounting surface, then pull the required cables through the hole.

CAUTION

THIS SYMBOL INDICATES THAT

DANGE OUSRVOLTAGE

CONSTITUTING A RISK OF

ELECTRIC SHOCK IS PRESENT

WITHIN THE UNIT.

CA:TUTIONO REDUCETHE RISK OF ELECTRIC

SHOCK, DO NT REMTHE COOVEOVER.

NO USER-SERVICEABLE PAR.TS INSIDE

REFER SERTO QUVICINGALIFIED SERVICE

PERSONNEL.

THIS SYMBOL INDICATES THAT

IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS

ACCOMPANY THIS UNIT.

RISK OF ELECTRIC

SHOCK

DO NT OPENO

Produktspezifikationen