Hoshizaki HS-5254 Bedienungsanleitung

Lies die bedienungsanleitung für Hoshizaki HS-5254 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 5.5 Bewertungen. Hast du eine Frage zu Hoshizaki HS-5254 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

2A8478-013

Hoshizaki Prison Kit

HS-5245, HS-5246, HS-5252, HS-5253,

HS-5254, HS-5255, HS-5426, HS-5427

For use with Hoshizaki Ice Machines: KM-350M_J, KM-520M_J, KM-660M_J,

KM-901M_J, KM-1301S_J/3, and KM-1900S_J/3

Check to ensure that all parts are included:

Index

No.Description

Kit

NumberModel

Part

NumberQty

1Front PanelHS-5426KM-350MAJ, KM-520MAJ, KM-660MAJ3B0020G011

HS-5427KM-350MWJ, KM-520MWJ, KM-520MRJ, KM-660MWJ, KM-660MRJ1A5320G011

HS-5245KM-901MAJ2A8612G011

HS-5246KM-901MWJ2A8612G021

HS-5252KM-1301SAJ/32A7289G011

HS-5253KM-1301SWJ/32A7251-011

HS-5254KM-1900SAJ/32A7292G011

HS-5255KM-1900SWJ/32A7252-011

2Torx Screw (4 mm-small)AllAll7PP2I081220

3Torx Screw (4 mm-large)AllAll7PP2-04106

4Torx Screw (5 mm)AllAll7PP2-05123

5Torx Pin Bit (small)AllAll7PP2-00011

6Torx Pin Bit (large)AllAll7PP2-00021

WARNING

• Only qualied service technicians should install this kit to reduce the risk of death, electric shock, serious injury, or re.

• Move the icemaker control switch to the "OFF" position and turn off the power supply before servicing. Lockout/Tagout to

prevent the power supply from being turned back on inadvertently.

• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after any maintenance is

done to the appliance. Make sure that none have fallen into the ice storage bin.

• No installation or service should be undertaken until the technician has thoroughly read these instructions.

Installation Instructions

1) Turn off the power supply. Lockout/Tagout to prevent the power supply from being turned on inadvertently.

2) Remove and discard the front panel and screw(s). See Fig. 1 and Fig. 2.

3) Place the new front panel in its correct position and secure with Torx screw(s) (4 mm-large) provided in this kit.

4) Remove all screws from the sides of the appliance (KM-1301 and KM-1900S_J/3) and replace with Torx screws (4 mm-large)

provided in this kit. See Fig. 2.

Fig. 2

Model Shown:

KM-520MAJ

Fig. 1

4 mm-large

Model Shown:

KM-1900SAJ3

4 mm-large

4 mm-large

4 mm-large

Side

Side

Produktspezifikationen