Hoshizaki HS-5427 Bedienungsanleitung

Lies die bedienungsanleitung für Hoshizaki HS-5427 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 5 Bewertungen. Hast du eine Frage zu Hoshizaki HS-5427 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

2A8478-013

Hoshizaki Prison Kit

HS-5245, HS-5246, HS-5252, HS-5253,

HS-5254, HS-5255, HS-5426, HS-5427

For use with Hoshizaki Ice Machines: KM-350M_J, KM-520M_J, KM-660M_J,

KM-901M_J, KM-1301S_J/3, and KM-1900S_J/3

Check to ensure that all parts are included:

Index

No.Description

Kit

NumberModel

Part

NumberQty

1Front PanelHS-5426KM-350MAJ, KM-520MAJ, KM-660MAJ3B0020G011

HS-5427KM-350MWJ, KM-520MWJ, KM-520MRJ, KM-660MWJ, KM-660MRJ1A5320G011

HS-5245KM-901MAJ2A8612G011

HS-5246KM-901MWJ2A8612G021

HS-5252KM-1301SAJ/32A7289G011

HS-5253KM-1301SWJ/32A7251-011

HS-5254KM-1900SAJ/32A7292G011

HS-5255KM-1900SWJ/32A7252-011

2Torx Screw (4 mm-small)AllAll7PP2I081220

3Torx Screw (4 mm-large)AllAll7PP2-04106

4Torx Screw (5 mm)AllAll7PP2-05123

5Torx Pin Bit (small)AllAll7PP2-00011

6Torx Pin Bit (large)AllAll7PP2-00021

WARNING

• Only qualied service technicians should install this kit to reduce the risk of death, electric shock, serious injury, or re.

• Move the icemaker control switch to the "OFF" position and turn off the power supply before servicing. Lockout/Tagout to

prevent the power supply from being turned back on inadvertently.

• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after any maintenance is

done to the appliance. Make sure that none have fallen into the ice storage bin.

• No installation or service should be undertaken until the technician has thoroughly read these instructions.

Installation Instructions

1) Turn off the power supply. Lockout/Tagout to prevent the power supply from being turned on inadvertently.

2) Remove and discard the front panel and screw(s). See Fig. 1 and Fig. 2.

3) Place the new front panel in its correct position and secure with Torx screw(s) (4 mm-large) provided in this kit.

4) Remove all screws from the sides of the appliance (KM-1301 and KM-1900S_J/3) and replace with Torx screws (4 mm-large)

provided in this kit. See Fig. 2.

Fig. 2

Model Shown:

KM-520MAJ

Fig. 1

4 mm-large

Model Shown:

KM-1900SAJ3

4 mm-large

4 mm-large

4 mm-large

Side

Side

Produktspezifikationen