Ikan PT19-SDI-TM Bedienungsanleitung


Lies die bedienungsanleitung für Ikan PT19-SDI-TM (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Ikan PT19-SDI-TM oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/5
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re toofilmmakers
PT19-SDI-TM
Quick Start Guide
19" High Bright Talent Teleprompter Add-On Kit (SDI)
What’s Included
1 x SDI Teleprompter Monitor w/ Aluminum Chassis
1 x Power Adapter with Cable
1 x VESA Monitor Mount
1 x Mounting Knob
4 x 10mm Screws
4 x 15mm Screws
2 x Large Screws
4 x Riser Washers
1 x Adjustable Plate
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re toofilmmakers
Assembly Steps
Setting Up the Talent Monitor
Using the shorter 4 x 10mm Screws, attach the VESA Monitor Mount. Make sure that the long end of the VESA Monitor Mount is pointing in the direction
of the power button like the image above. Use the Mounting Knob to tighten the 15mm Rod Adapter to the VESA Monitor Mount.
Setting Up the Teleprompter Monitor (Monitor from the PT4900-SDI)
If the mounting brackets where previously installed on the teleprompter monitor, remove those screws. Using the longer 4 x 15mm Screws and 4 x Riser
Washers attach the mounting brackets with the washers between the bracket and monitor like the image below.
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re toofilmmakers
Attaching the Talent Monitor
After both the talent monitor and teleprompter monitor are set up, slide the talent monitor on to the PT4900-SDI.
*WARNING* We recommend at least 1 inch of rod should be left inside the teleprompter base.


Produktspezifikationen

Marke: Ikan
Kategorie: Nicht kategorisiert
Modell: PT19-SDI-TM

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ikan PT19-SDI-TM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten