Ilford Ilfosol 3 Bedienungsanleitung
Ilford
Nicht kategorisiert
Ilfosol 3
Lies die bedienungsanleitung für Ilford Ilfosol 3 (8 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 12 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 6.5 Bewertungen. Hast du eine Frage zu Ilford Ilfosol 3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/8
TECHNICAL INFORMATION
ILFOSOL
3
FILM
DEVELOPER
LIQUID CONCENTRATE DEVELOPER
FOR LOW
VOLUME BLACK
AND
WHIT
E
FILM PROCESSING
IN
SPIRAL TANKS, DISHES, TRAYS
AND
RO
TA
RY
PROCESSORS WITHOUT
RE
PLE
N
ISH
M
E
N
T
Add the concentrate to the mixing vessel. A large
measuring jug is a good mixing vessel as it provides a
check on the total quantity of solution mixed.
ILFORD ILFOSOL 3 is a liquid concentrate black and
white film developer formulated to exploit the full
potential of conventional black and white film emulsions
in all formats. It enables professionals and amateurs to
economically develop small quantities of ILFORD and
other films with ease and convenience.
Rinse out the measuring cylinder used for the concentrate
into the mixing vessel.
ILFOSOL 3 is particularly suited to developing medium
Finally add hot and cold water to make up the final
volume at the desired temperature and stir thoroughly.
speed films such as FP4 Plus and DELTA 100
PROFESSIONAL. It gives fine grain and good sharpness
As most water drawn from pressure mains is highly
aerated, we advise that users draw off the water they
need and leave it to stand for a few minutes before using
it to make up developers.
with full film speed.
ILFOSOL 3 is supplied as a liquid concentrate normally
diluted 1+9 for one-shot use. Dilute it immediately before
use and discard directly after development. For greater
economy it can be used with many films at a higher
dilution of 1+14 with only a small trade off in image
quality.
Thoroughly wash all utensils, measuring and mixing
vessels after use. Do not contaminate developer solutions
with either stop bath or fixer solutions.
ILFOSOL 3 is not recommended when using re-use
techniques or replenishment systems.
Mixing
ins
t
ructio
ns
Note Photographic chemicals are not hazardous
when used correctly. It is recommended that gloves, eye
protection and an apron or overall are worn when
handling and mixing all chemicals.
Always follow the specific health and safety
recommendations on the chemical packaging.
Photochemical material safety data sheets containing full
details for the safe handling, disposal and transportation
of ILFORD chemicals are available from ILFORD agents or
directly from the ILFORD web site at :-
www.
i
l
f
o
rd
pho
t
o
.
c
o
m.
Determine first either the tank size being used or the
number of films to be processed and measure out the
appropriate quantity of concentrate.
Always use the smallest measuring cylinder available : it
is easier to measure 10ml accurately in a 50ml cylinder
than in a 500ml cylinder.
Page 1 of 8
Produktspezifikationen
| Marke: | Ilford |
| Kategorie: | Nicht kategorisiert |
| Modell: | Ilfosol 3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ilford Ilfosol 3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Ilford
10 Oktober 2025
10 Oktober 2025
10 Oktober 2025
10 Oktober 2025
10 Oktober 2025
10 Oktober 2025
24 August 2024
24 August 2024
7 April 2024
8 Dezember 2023
Bedienungsanleitung Nicht kategorisiert
- Toolit
- Teslong
- Eissound
- Nerf
- Hanwha
- Beper
- Advance
- Aconatic
- BMW
- Cord
- Carmen
- Kiev
- Highpoint
- Sportstech
- Minolta
Neueste Bedienungsanleitung für -Kategorien-
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026