Insignia NS-CSPBTF1 Bedienungsanleitung

Lies die bedienungsanleitung für Insignia NS-CSPBTF1 (2 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 40 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 20.5 Bewertungen. Hast du eine Frage zu Insignia NS-CSPBTF1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

SAFETY

INFORMATION

• Use the speaker in normal temperatures.

• Do not use the speaker under the water.

• Do not throw the speaker.

• Do not cover or insert anything into the

holes in the speaker.

• Do not put the speaker close to any heat

source.

• Contact your retailer if the charging cable

does not connect to your speaker.

• Do not disassemble, repair, or modify the

speaker.

• Do not charge the speaker using more

than 5V.

• High volumes may damage your hearing.

Use the speaker at a lower volume.

• Disassembling the speaker voids its

warranty.

PACKAGE CONTENTS

• Bluetooth Speaker

• Micro USB cable

• Quick Setup Guide

Before using your new product, please read

these instructions to prevent any damage.

FEATURES

Top

Side

Power button

Volume +/- buttons

Call

button

Bluetooth LED

CHARGING YOUR

SPEAKER

The charging LED blinks red when the

speaker’s battery is low.

• Connect the micro USB cable from your

speaker’s micro USB port to a USB port

(such as a computer or wall charger). The

charging LED lights red while charging,

then turns off when the battery is fully

charged.

CONNECTING AN

AUDIO DEVICE

Bluetooth

1Press and hold (power) to turn on

your speaker. The Bluetooth LED blinks

blue quickly and your speaker

automatically enters pairing mode.

2Make sure that your Bluetooth device is

within 33 ft. (10 m) of your speaker.

3Turn on your Bluetooth device, turn on

Bluetooth, then enter pairing mode. For

more information, see the documenta-

tion that came with your Bluetooth

device.

Charging

LED

Reset hole

Micro USB

port

AUX IN

jack

4On your Bluetooth device, select

NS-CSPBTF1. Your speaker pairs with

your Bluetooth device and the

Bluetooth LED lights solid blue.

5To disconnect, un-pair your Bluetooth

device from your speaker.

Audio cable

• Connect a 3.5 mm audio cable (not

included) from your speaker’sAUX IN

jack to your audio device’s

headphone/audio out jack.

USING YOUR

SPEAKER

Listening to audio

1Play audio on your connected device.

2Press + or - to adjust your speaker’s

volume.

Note: Make sure that your connected

device’s volume is set to at least 50%.

3Use the controls on your connected

device to control playback.

QUICK SETUP GUIDE

Bluetooth

Speaker

NS-CSPBTF1

Produktspezifikationen