Insignia NS-RMTSAM21 Bedienungsanleitung

Lies die bedienungsanleitung für Insignia NS-RMTSAM21 (2 Seiten) kostenlos online; sie gehört zur Kategorie Fernbedienung. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 5.5 Bewertungen. Hast du eine Frage zu Insignia NS-RMTSAM21 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

3Point your new remote towards the

TV, then press and hold the

power button.

4 As soon as your TV turns o,

immediately release the power

button. The LED blinks twice.

Note: You have three seconds to release

the power button before your remote

sends a dierent code to your TV.

5Use the power button to turn on

your TV, then test the other buttons.

6If one or more buttons don’t work

as you expect, repeat steps 1

through 5 using the or MENUINFO

button instead of the power

button.

Before using your new product, please read

these instructions to prevent any damage.

QUICK SETUP GUIDE

Replacement

Remote

For Samsung TVs

NS-RMTSAM21

SETTING UP YOUR SOUND BAR OR AUDIO RECEIVER VOLUME CONTROL

If you have your TV connected to a soundbar or audio receiver, you can set up your new remote to control the volume

of this device.

2Enter the rst four-digit code for

your sound bar or audio device.

The LED should blink twice on the

last digit.

3 Testvolume + and - button and

the (mute) button.

If the volume buttons don’t Note:

work, start again at step 1 using the

next code on the list.

Turning on all devices

If you have set up your soundbar or

audio device using Simple Setup or

Audio Code Setup, you can now turn

your TV and the audio device both on

and o using a single button. Hold

down the power button for three

seconds. Your new remote turns on

both the TV and the audio device or

soundbar. If you press and release the

button, it only turns on the TV.

Simple Setup

If you have a sound bar or audio device

from one of the brands listed above,

complete the following steps:

1Turn your TV and sound bar or

audio device on, and make sure that

there is something playing that you

can hear.

2On your new remote hold down the

volume + and - buttons together

until the LED blinks twice.

3Point your new remote towards

your sound bar or audio devices

and hold down the digit button for

your brand (see table to the left).

4 As soon as your sound bar or audio

device mutes the volume, release

the digit button. The LED blinks

twice. The remote has found the

code for your soundbar or audio

device.

The volume buttons should now

control the volume of your your

sound bar or audio devices.

Audio code setup

If your sound bar or audio device is

not one of the brands listed, you can

also set up the remote to control it by

entering a four-digit code. Locate the

brand of your sound bar or audio

device in the Remote Codes List found

in the separate document.

1Hold down the volume + and -

buttons together until the LED

blinks twice.

PACKAGE CONTENTS

• Replacement Remote

• Quick Setup Guide

INSTALLING BATTERIES

Insert two AAA batteries (not included)

into the remote. Make sure that the +

and – symbols match the + and –

symbols in the battery compartment.

SETTING UP YOUR REMOTE

The Insignia remote is

pre-programmed to control most

Samsung TVs.

If the buttons do not work, complete

the following steps:

1Make sure that your TV is on and not

in standby mode.

2On your new remote, hold down red

A Dand blue until the power

button LED blinks twice.

DIGIT BRAND

0Yamaha

1Bose

2Denon

3Samsung / JBL /

Harman / Kardon

4LG / JVC

5Marantz / Philips

6Onkyo

7Panasonic / Technics

8Pioneer

9Sony

Power

button

AAA

+

AAA

+

LED

LED

Produktspezifikationen