Insignia NS-S10MCBK2 Bedienungsanleitung
Seiten 2 Aktenvernichter
Lies die Bedienungsanleitung für Insignia NS-S10MCBK2 kostenlos online oder lade das PDF herunter. 13 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
LED indicators
Buttons
Door openOverload
Overheat
RevFwd
Auto
SETTING UP YOUR SHREDDER
1Push the wheel casters into the holes on the bottom of your shredder.
The wheels with the brake levers go into the front holes.
2Place the wastebasket upright on a level surface.
3Lock the wheel brakes (press the levers down with your foot) to keep
your shredder from moving.
Note: Your shredder must be at least 2 in. (5 cm) from any walls for ventilation
purposes.
4Attach the shredder head to the basket. Make sure that it ts correctly.
5Place the wastebasket securely in the shredder.
Note: Do not use plastic bags to line the wastebasket.
6Connect the power cord to a power outlet. Do not use an extension
cord.
USING YOUR SHREDDER
1Turn the shredder on by pressing the POWER switch on the back of the
unit to . I
2Press the Auto Autobutton to turn on auto mode, the button is blue
when activated.
3Insert up to 10 sheets of paper or one credit card at a time into the
shredding slot. Your shredder automatically shreds what you insert.
Note: Don’t put envelopes, adhesive material, newsprint, transparencies,
laminated documents, continuous forms, cardboard, or hard plastic materials
(except credit cards) through the shredder. You can shred small staples and small
paper clips, if they are attached to the paper you are shredding.
4Rev If the shredder jams, press to reverse the paper, then press the Auto
button. The shredder will operate normally again when the jam is
cleared.
5When the wastebasket is 2/3 full, move the power button to O, unplug
the cord from the power outlet, then pull-out and empty the
wastebasket.
Note: For best performance, we recommend that you shred for 15 minutes, then
let your shredder cool for 20 minutes.
PACKAGE CONTENTS
• Micro cut shredder with wastebasket
• Quick Setup Guide
FEATURES
• Shreds up to 10 sheets of paper at one time
• Destroys credit cards, compact discs, small staples, and small paper clips
• Micro-cut size .16 × .5 in. (4 × 12 mm) protects sensitive data
• 5.3 gal (20 l) capacity wastebasket holds shredded waste and is easy to
empty
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
10-Sheet Micro
Cut Shredder
NS-S10MCBK2 / NS-S10MCBK2-C
# ITEM
1Shredding slot
2Shredding slot (CD/DVD)
3LED indicators
4Button panel
5Handles
6Window
7Wastebasket
8Wheels
9POWER switch
DESCRIPTION
Insert up to 10 sheets of paper or one credit card at a time.
Insert one credit card or one disc at a time.
Overload: Lights when trying to shred over the maximum 10
sheets or when the paper is folded. When overloaded, the cutter
turns o automatically.
Overheat: Lights when your shredder has overheated. When
overheated, the shredder stops shredding. After 20 minutes, the
indicator turns o and the shredder can shred again.
Door open: Lights when the shredder head is not on the
wastebasket or when the head is not in the correct position on the
wastebasket.
Rev: Pressto reverse the shredder for ve seconds. Press and hold
to reverse the shredder until you release the button. Reverses the
paper in the slot to clear a jam or remove unshredded paper.
Auto: Automatically shreds an item when inserted into the
shredding slot. The POWER indicator lights blue. After shredding,
the shredding stops automatically.
The Auto indicator lights solid blue, then turns o when
shredding is complete.
Fwd: Pressto shred for ve seconds. Press and hold to shred until
you release the button.
Note: When you press , the FwdAUTO LED indicator will ash blue. Use
Fwd to make sure that the remaining paper in the slot gets shredded or
to clear the slot.
Let you easily lift up the shredder head to empty the paper inside
the wastebasket. Make sure that your shredder is turned o
before you move your shredder.
Lets you see how much shredded material is in the wastebasket.
Holds the paper, cards, and discs that you have shredded. Empty
the wastebasket when it is 2/3 full (to the top of the window).
Let you move your shredder to a new location. The brakes on the
front wheels prevent your shredder from moving.
Turns your shredder on and o. Located on the back of the
shredder.
Auto
Rev
Produktspezifikationen
| Marke: | Insignia |
| Kategorie: | Aktenvernichter |
| Modell: | NS-S10MCBK2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Insignia NS-S10MCBK2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Aktenvernichter Insignia
Insignia NS-PS06CC Bedienungsanleitung Insignia NS-PS06SC Bedienungsanleitung Insignia NS-PS06CC-C Bedienungsanleitung Insignia NS-PSJMCC Bedienungsanleitung Insignia NS-PS10CC Bedienungsanleitung Insignia NS-S10CCBK Bedienungsanleitung Insignia NS-S6CCBK2 Bedienungsanleitung Insignia NS-PS10MC Bedienungsanleitung
Alle Insignia Aktenvernichter Bedienungsanleitungen
Bedienungsanleitung Aktenvernichter
Neueste Bedienungsanleitungen für Aktenvernichter
Hama Prime M100 Bedienungsanleitung Hama Prime M50CD Bedienungsanleitung Dahle ShredMATIC 35090 Bedienungsanleitung HSM SECURIO B22 1.9x15mm Oiler Bedienungsanleitung Fellowes AutoMax 150C Bedienungsanleitung Fellowes Powershred C-325Ci Bedienungsanleitung Fellowes AutoMax 130C Bedienungsanleitung HSM 1882 Bedienungsanleitung HSM Pure 320c Bedienungsanleitung HSM Securio B26 4.5 x 30mm Bedienungsanleitung