Insignia NS-S6CCBK2 Bedienungsanleitung
Insignia
Aktenvernichter
NS-S6CCBK2
Lies die bedienungsanleitung für Insignia NS-S6CCBK2 (2 Seiten) kostenlos online; sie gehört zur Kategorie Aktenvernichter. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 3 Bewertungen. Hast du eine Frage zu Insignia NS-S6CCBK2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
SETTING UP YOUR SHREDDER
1 Place the wastebasket upright on a level surface.
2 Attach the shredder head to the basket. Make sure that it
ts correctly.
Note: Do not use plastic bags to line the wastebasket.
3 Connect the power cord to a power outlet. Do not use an
extension cord.
USING YOUR SHREDDER
1 Slide the power switch to AUTO.
2 Insert paper (up to six pages) or one credit card into the
shredding slot. Your shredder automatically shreds what
you insert.
Note: Don’t put envelopes, adhesive material, newsprint,
transparencies, laminated documents, continuous forms,
cardboard, or hard and plastic materials (except credit cards)
through the shredder. You can shred small staples and small
paper clips, if they are attached to the paper you are shredding.
3 If the shredder jams, slide the switch to REV to return the
paper, then slide the switch to . The shredder can be AUTO
used again when the jam is cleared.
4 When the wastebasket is 2/3 full, slide the switch to OFF,
unplug the cord from the power outlet, then lift o the
shredder head and empty the wastebasket.
PACKAGE CONTENTS
• Cross cut shredder with wastebasket
• Quick Setup Guide
FEATURES
• Shreds up to six sheets of paper at one time
• Destroys credit cards, small staples, and small paper clips
• Cross-cut size .2 × 1.3 in. (5 × 34 mm) protects sensitive data
• 3.2 gal. (12 l) capacity wastebasket holds shredded waste and
is easy to empty
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
6-Sheet Cross
Cut Shredder
NS-S6CCBK2 / NS-S6CCBK2-C
AUTO
REV
# ITEM
1 Handle
2 Shredding
slot
3 LED
indicators
4 Switch
5 Window
6 Wastebasket
DESCRIPTION
Lets you easily lift up the shredder head
to empty the paper inside the
wastebasket . Make sure that your
shredder is turned o before you move it.
Insert up to six sheets of paper at a time
or one credit card at a time.
Overheat: Lights when your shredder
has overheated. When overheated, the
shredder stops shredding. After 30
minutes, the indicator turns o and the
shredder can shred again.
Power: Lights when your shredder is in
use.
FWD: Sends an item through your
shredder. The Power indicator lights
green.
Note: When you slide the power switch to
FWD, the cutters run forward continuously. To
stop the cutters, you have to move the switch
to a dierent position.
Only use FWD to make sure that the
remaining paper in the slot gets shredded or
that you want to clear the slot.
AUTO: Automatically shreds an item
when inserted into the shredding slot.
The Power indicator lights green. After
shredding, the shredding stops
automatically.
OFF: Turns o your shredder.
REV: Reverses the paper in the slot to
clear a jam or remove unshredded paper.
The power indicator light turns green
when REV is being used, similar to FWD.
Let you see how much shredded material
is in the wastebasket.
Holds the paper and credit cards that you
have shredded. Empty the basket when it
is 2/3 full.
OverheatPower
FWD REV
OFFAUTO
Switch
LED indicators
TROUBLESHOOTING
My shredder isn’t working.
• Make sure that the power cord is plugged into a working power
outlet. If the power cord is damaged, replace it.
• Make sure that the shredder head and wastebasket are positioned
correctly.
• If the Overheat indicator is on, let your shredder cool at least 30
minutes. When the indicator is o, you can use your shredder
again.
• Change the position of the paper as you insert it.
• The paper may be too thin or crumpled for your shredder to
recognize it. Fold the paper, then reinsert it.
• Slide the switch to FWD.
• Make sure that you only send six sheets of paper or one credit
card through your shredder at a time.
My shredder is jammed.
• Slide the switch to , remove the paper from the cutter, then REV
slide the switch to AUTO, and try again.
The cutter won’t stop.
• Slide the switch to , unplug your shredder from the power OFF
outlet, then push the shredded paper down to make sure that it is
away from the shredder head.
• Slide the switch to REV to remove extra paper or credit card from
your shredder.
My shredder is too noisy.
• Make sure that your shredder is on a at, level surface.
• Make sure that the shredder head and wastebasket are positioned
correctly.
The Overheat indicator is lit.
• Let your shredder cool at least 30 minutes. When the indicator
turns o, you can use your shredder again.
SPECIFICATIONS
• 14.7 × 12.1 × 6.9 in. Dimensions (H×W×D):
(37.4 × 30.8 × 17.6 cm)
• Cutting style: Cross cut
• Entry width: 8.6 in. (22 cm)
• Shred capacity: 6 sheets (75 g/m2 A4 paper)
• .2 × 1.3 in. (5 × 34 mm)Shred size:
• 2.2 m/min.Shred speed:
• Duty cycle: 4 minutes ON / 30 minutes OFF
• Input: AC 120 V, 60 Hz, 2.0 A
• Net weight: 7.9 lbs. (3.6 kg)
• Basket capacity: 3.2 gal. (12 l)
• Noise level (db) @ Non-loading at 1 M distance: 70 dB
• P-3 Security level:
LEGAL NOTICES
FCC statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-003(B)/NMB-003(B)
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2021 Best Buy. All rights reserved.
V3 ENGLISH 21-0547
IMPORTANT SAFETY INFORMATION
Please read thoroughly
Before using the shredder, please read the guide and become familiar with the safety
information, operating instructions, and maintenance requirements. Follow all warnings and
instructions in the guide and as marked on the shredder. Do not attempt to service this unit by
yourself. Doing so will void the manufacturer’s warranty and may expose you to sharp cutting
blades and/or high voltage electric shock that could cause serious injury. Any repairs must be
performed by qualied service personnel.
11. Keep in the OFF position when the shredder is not in use for prolonged periods of time.
12. Empty wastebasket frequently.
13. The document shredder must always be deactivated and disconnected from the electrical
line prior to moving, transporting, and cleaning the device and prior to emptying the
wastebasket .
14. The device may not be operated with a damaged power cord.
15. For indoor use only.
16. To protect the machine, we suggest the user to operate it in this way: work 4 minutes then
rest 30 minutes.
17. The machine allows a maximum shred six sheets paper (75 gsm) or one credit card
at one time.
18. The socket-outlet must be installed near the equipment and must be easily accessible
during use.
1. Read
instructions
before use
3. Avoid
touching the
document feed
opening with
hands
5. Product is not
intended for use
by children
(product is not a
toy)
4. Do not spray or keep any
aerosol products in or around
shredder
2. Avoid loose
clothing or
jewelry touching
the document
feed opening
7. Shredder
oil only
6. Avoid
getting hair
near the
document
feed opening
8. Sharp edges,
do not touch
9. This equipment is not
intended for use by children.
Avoid touching the media feed
opening with the hands,
clothing or hair. Unplug this
equipment when not in use of
an extended period of time.
10. Warning!
Before switching
the machine on,
make sure that
you observe all
safety
instructions
Produktspezifikationen
| Marke: | Insignia |
| Kategorie: | Aktenvernichter |
| Modell: | NS-S6CCBK2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Insignia NS-S6CCBK2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Aktenvernichter Insignia
2 September 2025
30 August 2025
30 August 2025
21 Juni 2025
13 Oktober 2024
30 August 2024
30 August 2024
30 August 2024
30 August 2024
Bedienungsanleitung Aktenvernichter
- Izzy
- Honeywell
- Aurora
- Einhell
- CMI
- Renkforce
- Primo
- IKRA
- Ariete
- Acco-Rexel
- SilverCrest
- Güde
- Orbegozo
- Pavo
- Kunft
Neueste Bedienungsanleitung für -Kategorien-
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
4 September 2025
3 September 2025
3 September 2025
3 September 2025