Insignia NS-STRL48FT3 Bedienungsanleitung

Lies die bedienungsanleitung für Insignia NS-STRL48FT3 (2 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 3.8 Sterne aus 5 Bewertungen. Hast du eine Frage zu Insignia NS-STRL48FT3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

REPLACING LIGHT BULBS

WARNING - RISK OF ELECTRIC SHOCK!!!

Disconnect power at the source prior to replacing a light bulb or fuse. Replace

light bulbs/fuse only during dry and calm weather conditions. Do NOT replace

light bulbs/fuse during rain or when wet.

1Lightly hold the bulb you want to replace in one hand, then twist the

bulb counterclockwise.

Note: The bulb may be tight in the socket. This is normal to prevent moisture

from getting into the socket.

2Screw the replacement bulb into the socket clockwise until the top of

the socket forms a tight seal around the bulb and the bulb makes solid

contact with the socket.

ADDING A LIGHT STRING

Note: You can add up to 28 string light sets.

1Unplug the rst light string.

2Remove the cap from the female end and insert the power plug on

the second string into the power outlet on the rst string.

Note: Tightly cap the female end when not in use.

Attach to a structure

1Attach screw hooks (not included) into the structure where you want

your string light. The screw hooks should be no less than 10 ft. (3 m)

apart.

2Attach the plastic loops on the end of the lights to the screw hooks.

3Plug the lights into a grounded outlet.

Before using your new product, please read these instructions to prevent any damage.

FEATURES

• Add accent lighting to your patio, garden, balcony, and more (for

outdoor use)

• 15 bulbs (plus 2 spare bulbs), on a 48 ft. (14.6 m) string, illuminate any

space

• 2200 K warm white lights make for a relaxing atmosphere

• Shatterproof LED bulbs withstand severe weather conditions and

accidental drops

• Built-in hanging sockets provide exible mounting options

• Supports end-to-end connection of up to 28 strands for added coverage

• Commercial-grade and UL rating assures outdoor, year-round use

CONNECTING YOUR STRING LIGHTS

Attach to a guide wire

1 Run a guide wire (not included) in the location where you want your string

light.

2 Attach an S hook or temporary tie (not included) through the plastic loop

on the end of each light.

CAUTION: Make sure that the guide wire is strong enough to hold up the light

string.

3Attach each plastic loop to the guide wire.

4Plug the lights into a grounded outlet.

QUICK SETUP GUIDE

48ft Outdoor

String Light

NS-STRL48FT3

S hook

Guide

wire

PACKAGE CONTENTS

• String light

• Replacement bulbs (2)

• Replacement fuse

• Quick Setup Guide

Plastic loop

Screw hooks

10 ft. (3 m)

Plastic loop

Additional

string lights

Cap

Produktspezifikationen