JANDY EE-Ti Bedienungsanleitung
JANDY
Wärmepumpe
EE-Ti
Lies die bedienungsanleitung für JANDY EE-Ti (96 Seiten) kostenlos online; sie gehört zur Kategorie Wärmepumpe. Dieses Handbuch wurde von 22 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 11.5 Bewertungen. Hast du eine Frage zu JANDY EE-Ti oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/96
H0335800 Rev H
Jandy® Heat Pumps
Model EE-Ti
WARNING
This product must be installed by a licensed HVAC technician certied in heat
pump repair and maintenance by the jurisdiction in which the product will be installed where such
state or local requirements exists. The technician must possess and comply with all certications and
regulations regarding the purchasing, handling, transportation and reclamation of R410A refrigerant.
In the event no such state or local requirement exists, the installer or maintainer must be a
professional with sufcient experience in pool equipment installation and maintenance so that all of
the instructions in this manual can be followed exactly. Before installing this product, read and follow
all warning notices and instructions that accompany this product. Failure to follow warning notices
and instructions may result in property damage, personal injury, or death. Improper installation and/
or operation can create an electrical hazard which can cause serious injury, property damage, or
death. Improper installation and/or operation will void the warranty.
Page 1
ENGLISH
Zodiac
®
Jandy
®
Heat Pumps Model EE-Ti | Installation and Operation Manual
1.1 Introduction ......................................................... 3
1.2 Consumer Information and Safety ...................... 3
1.2.1 Spa/Hot Tub Safety Rules ............................ 3
1.2.2 Swimming Pool Energy Saving Tips ............ 4
1.3 Warranty ............................................................. 4
1.4 Codes and Standards ......................................... 4
1.5 Technical Assistance ........................................... 5
1.6 Materials Needed For Installation ....................... 5
1.6.1 Materials for All Installations ........................ 5
1.6.2 Recommended Materials for Installations .... 5
1.7 Specifications ...................................................... 5
1.7.1 General Specifications ................................. 5
1.7.2 Dimensions .................................................. 5
1.7.3 Technical Specifications ............................... 5
2.1 General Information ............................................ 5
2.2 Location Requirements ....................................... 5
2.2.1 Introduction .................................................. 5
2.2.2 Clearances ................................................... 7
2.2.3 Equipment Pad ............................................ 8
2.2.4 Condensation and Drainage ........................ 8
2.2.5 Lawn Sprinklers ........................................... 8
2.2.6 Roof Run-off ................................................. 8
2.2.7 Installation of Anchor Clamps ...................... 8
3.1 Plumbing Layout ................................................ 9
3.2 Water Connections at Heat Pump ...................... 9
3.3 Check Valve Installation ...................................... 9
3.4 Automatic Flow Control Valve ........................... 10
3.5 Multiple Unit Installation .................................... 10
3.5.1 Heat Pump and Heater Combination ......... 10
3.5.2 Multiple Heat Pump Connections ............... 10
4.1 General Information .......................................... 10
4.2 Main Power ....................................................... 16
4.3 Bonding ............................................................. 16
4.4 Pump Connection (Maintain Temp Feature) ..... 16
4.5 Optional Remote Controls ................................ 17
4.5.1 Connection to a Remote Pool-Off-Spa
Selector (3-Wire Connection) ..................... 17
4.5.1.1 Install the Remote Pool-Off-Spa
Selector ................................................ 17
4.5.1.2 Configure the Control Panel ................ 17
4.5.2 Two-Wire Connection to an AquaLink® RS
or TSTAT .................................................... 17
4.5.2.1 Configure the AquaLink RS Control
System ................................................. 17
4.5.2.2 Install the Remote TSTAT .................... 17
4.5.2.3 Configure the Control Panel ................ 18
4.5.3 Four-Wire Connection to AquaLink® RS
485 Communication ................................... 18
4.5.4 Connection to a Secondary User Interface 19
5.1 Initial Start-up Precautions ................................ 19
5.2 Operating the Controller ................................... 19
5.2.1 Off Mode .................................................... 19
5.2.2 Pool Mode - (Normal Heat) ........................ 19
5.2.3 Pool Mode - (Optional Maintain Heat) ........ 20
5.2.4 Spa Mode - (Normal Heat) ......................... 20
5.2.5 Spa Mode - (Optional Maintain Heat) ........ 20
5.3 Operating Features of Hybrid Units with
Optional Chiller ................................................. 20
5.3.1 Pool Mode - (Normal Chill) ......................... 20
5.3.2 Pool Mode - (Optional Maintain Chill) ........ 20
5.3.3 Spa Mode - (Optional Maintain Chill) ......... 21
5.4 User Setup Options .......................................... 21
5.4.1 Language Setup ......................................... 21
5.4.2 Temperature Scale Setup .......................... 21
5.4.3 Spa Timer Setup ........................................ 21
5.4.4 Display Light Setup .................................... 21
5.5 Set Point Lockout .............................................. 22
5.6 Water Pressure Switch Adjustment ................... 22
6.1 Water Chemistry ............................................... 23
6.2 Winterizing ........................................................ 23
6.3 Spring Start-Up ................................................. 24
6.4 Inspection and Service ..................................... 24
6.4.1 Owner Inspection ....................................... 24
6.4.2 Professional Inspection .............................. 24
7.1 Heat Pump Design ............................................ 25
7.2 Heat Pump Components and Operation ........... 25
8.1 Troubleshooting Guide...................................... 26
8.2 Diagnostics ....................................................... 27
9.1 Ordering Information ......................................... 28
9.2 Zodiac EE-Ti Heat Pumps Parts List ................ 28
9.3 Zodiac EE-Ti Heat Pumps Exploded View ....... 29
Produktspezifikationen
| Marke: | JANDY |
| Kategorie: | Wärmepumpe |
| Modell: | EE-Ti |
Brauchst du Hilfe?
Wenn Sie Hilfe mit JANDY EE-Ti benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Wärmepumpe JANDY
19 August 2024
19 August 2024
18 August 2024
18 August 2024
17 August 2024
18 Mai 2024
30 März 2024
19 Dezember 2023
Bedienungsanleitung Wärmepumpe
- Maxicool
- Hisense
- Qlima
- Harmopool
- MRCOOL
- ATAG
- Junkers
- Hotpoint
- Itho Daalderop
- Daikin
- Electrolux
- AWB
- Mitsubishi
- Wilfa
- Vivax
Neueste Bedienungsanleitung für -Kategorien-
13 Juni 2025
13 Juni 2025
12 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
1 Juni 2025
1 Juni 2025
3 Dezember 2024