JANDY JSWC40 Bedienungsanleitung
JANDY
Nicht kategorisiert
JSWC40
Lies die bedienungsanleitung für JANDY JSWC40 (72 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 2 Bewertungen. Hast du eine Frage zu JANDY JSWC40 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/72
Installation and Operation Manual
Manuel d’installation et d’utilisation
Manual de instalación y operación
Commercial Salt Chlorinator
Models: JSWC40, JSWC53, JSWC80, JSWC100
WARNING
FOR YOUR SAFETY – This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which the product will be installed
where such state or local requirements exist. The maintainer must be a professional with sufficient experience in pool equipment installation and maintenance so that all of the instructions
in this manual can be followed exactly. Before installing this product, read and follow all warning notices and instructions that accompany this product. Failure to follow warning notices
and instructions may result in property damage, personal injury, or death. Improper installation and/or operation may void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which may cause serious injury, property damage, or death.
ATTENTION INSTALLER – This manual contains important information about the installation, operation and safe use of this product. This information should be given
to the owner/operator of this equipment.
Page 2
ENGLISH Jandy
®
Commercial Salt Chlorinator | Installation & Operation Manual
Table of Contents
EQUIPMENT INFORMATION RECORD
DATE OF INSTALLATION _______________________________________________________________________________
INSTALLER INFORMATION _____________________________________________________________________________
INITIAL PRESSURE GAUGE READING (WITH CLEAR FILTER) ____________________________________________
PUMP MODEL ________________________________ HORSEPOWER ____________________________________
NOTES _______________________________________________________________________________________________
_______________________________________________________________________________________________
Section 1. Important Safety Instructions ......... 3
1.1 Safety Instructions .........................................3
Section 2. System Description ......................... 6
2.1 Product Description .......................................7
2.2 Electrical Specifications .................................8
2.3 Control Panel Description ..............................9
Section 3. Installation Instructions ................. 10
3.1 Installation of Power Supply ........................10
3.2 Installation of the Electrolysis Cell ................ 10
3.3 Installing Control/Power Centers ................. 11
3.4 Terminal Block (External Signals) Description 13
3.5 Polarity Switching Configuration ..................13
3.6 Communication Port (RS-485) .....................13
3.7 System Configuration / Configuration menu 15
3.8 Pool Cover Control ....................................... 16
3.9 Flow Detector (Built-In) ................................16
3.10 External Chlorine Control .............................18
3.11 Information About the Model and Polarity
Switching Frequency ....................................18
3.12 Information of Working Time ........................ 19
3.13 Firmware Version ..........................................20
Section 4. New Installation ............................. 21
4.1 Pool Water Preparation ................................21
4.2 Determining Pool Size (Liters of Water in Your
Pool) .............................................................21
4.3 Determining Pool Size (Gallons of Water in Your
Pool) .............................................................21
4.4 Selecting Model Size ....................................21
4.5 Chemistry You Need to Know ......................22
4.6 Optimum Pool Water Conditions .................22
4.7 Chlorine Testing ............................................23
4.8 Salt (NaCl Sodium Chloride) ........................23
Section 5. Operating Instructions .................. 25
5.1 Device Start-Up ............................................25
5.2 Production Setpoint Value ............................25
5.3 Indicative Table of the Display and its Meaning
26
5.4 Alarms ..........................................................27
5.5 Operation .....................................................28
5.6 Start-Up........................................................28
Section 6. User Maintenance Instructions .... 29
6.1 Daily .............................................................29
6.2 Monthly ........................................................29
6.3 Electrolytic Cell Cleaning - As Needed ........ 30
6.4 Winterizing ....................................................30
Section 7. Troubleshooting .............................32
Section 8. Exploded Views and Replacement
Kits ..................................................33
Produktspezifikationen
| Marke: | JANDY |
| Kategorie: | Nicht kategorisiert |
| Modell: | JSWC40 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit JANDY JSWC40 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert JANDY
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
22 Juli 2025
1 September 2024
21 August 2024
Bedienungsanleitung Nicht kategorisiert
- SXT
- Zurn
- Swisscom
- Horizon
- Summer Infant
- Pontec
- Kaiser Fototechnik
- Atlantic
- Nous
- Dörr
- Kreg
- Nexibo
- MGL Avionics
- Parkside
- Perfect Christmas
Neueste Bedienungsanleitung für -Kategorien-
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025