JANDY TC3 Bedienungsanleitung
Lies die bedienungsanleitung für JANDY TC3 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 13.5 Bewertungen. Hast du eine Frage zu JANDY TC3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
1. After the 1½" return line is
plumbed through shell and
pressure tested, cut pipe flush
with the pool wall.
2. Use Inside Pipe Cutter (part
#5-17-4) to cut pipe back 5/8"
behind shell surface.
3. Prime pipe and fitting. With
protective cap attached, glue
fitting into pipe, positioning for
thickness of finish material.
4. After troweling the final finish,
use needle-nose pliers
(or ThreadCare Tool, part
#4-17-4) to remove the
protective cap turning clockwise
until cap separates or breaks
off.
5. At startup, select and insert the
applicable restrictor nozzle if
required for the installation.
1. After the 1½" return line is
plumbed through shell and
pressure tested, cut pipe flush
with the pool wall.
2. Use Inside Pipe Cutter (part
#5-17-4) to cut pipe back 5/8"
behind shell surface.
3. Prime pipe and fitting. With
protective cap attached, glue
fitting into pipe, positioning for
thickness of finish material.
4. After troweling the final finish,
use needle-nose pliers
(or ThreadCare Tool, part
#4-17-4) to remove the
protective cap turning clockwise
until cap separates or breaks
off.
5. At startup, select and insert the
applicable restrictor nozzle if
required for the installation.
Reducer
Nozzles
Protective
Cap
Reducer
Nozzles
Protective
Cap
Pool ll Pool llWa Wa
5/8" Behind
Shell Surface
5/8" Behind
Shell Surface
CAUTION
This product must be installed by a contractor who is licensed and qualified in
pool equipment by the jurisdiction in which the product will be installed where
such state or local requirements exists.
CAUTION
This product must be installed by a contractor who is licensed and qualified in
pool equipment by the jurisdiction in which the product will be installed where
such state or local requirements exists.
Installation Instructions Installation Instructions
©2021 Zodiac Pool Systems LLC. All rights reserved. Zodiac
®
is a registered trademark of Zodiac International, S.A.S.U. used under license.
All other trademarks referenced herein are the property of their respective owners. TL-1317 D
©2021 Zodiac Pool Systems LLC. All rights reserved. Zodiac
®
is a registered trademark of Zodiac International, S.A.S.U. used under license.
All other trademarks referenced herein are the property of their respective owners. TL-1317 D
TC3 Flush Mount Pool/Spa Return Jet TC3 Flush Mount Pool/Spa Return Jet
855.280.6465
Jandy.com
855.280.6465
Jandy.com
Produktspezifikationen
| Marke: | JANDY |
| Kategorie: | Nicht kategorisiert |
| Modell: | TC3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit JANDY TC3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert JANDY
20 September 2025
20 September 2025
5 September 2025
4 September 2025
4 September 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
25 Juli 2025
Bedienungsanleitung Nicht kategorisiert
- Rotatrim
- Black Hydra
- ESYLUX
- Neopower
- Kendau
- Seaward
- Carry-on
- Heckler & Koch
- Wiha
- FoodSaver
- Kurth Electronic
- Gima
- Gasmate
- Elettrobar
- Cuisinart
Neueste Bedienungsanleitung für -Kategorien-
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026