Jensen JCR311 Bedienungsanleitung


Lies die bedienungsanleitung für Jensen JCR311 (25 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 12 Bewertungen. Hast du eine Frage zu Jensen JCR311 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/25
JCR311
AM-FM/Bluetooth/CD/USB Receiver
INSTALLATION &
OWNER’S MANUAL
2
INSTALLATION
2
Preparation
Please read entire manual before installation.
Before You Start
Disconnect negative battery terminal. Consult a qualified technician for
instructions.
Avoid installing the unit where it would be subject to high temperatures, such
as from direct sunlight, or where it would be subject to dust, dirt or excessive
vibration.
Getting Started
Remove trim ring from unit.
Remove 2 transit screws located on top of the unit.
Insert the supplied keys into the slots as shown, and slide the unit out of the
mounting sleeve.
Install mounting sleeve into opening, bending tabs to secure.
Connect wiring harness and antenna. Consult a qualified technician if you are
unsure.
Certain vehicles may require an installation kit and/or wiring
harness adapter (sold separately).
Test for correct operation and slide into mounting sleeve to secure.
TYPICAL FRONT-LOAD DIN MOUNTING METHOD
3
INSTALLATION
3
Wiring Diagram
FUSE
When replacing the
fuse, make sure new
fuse is the correct type
and amperage. Using
an incorrect fuse could
damage the radio.
The
10 amp ATC fuse
located beside the wiring
connector.
unit uses one
Antenna
Connector
Remote Turn On
Connect to amplifier or power
antenna. Insulate wi if not used.re


Produktspezifikationen

Marke: Jensen
Kategorie: Empfänger
Modell: JCR311

Brauchst du Hilfe?

Wenn Sie Hilfe mit Jensen JCR311 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten