JET A635 Bedienungsanleitung


Lies die bedienungsanleitung für JET A635 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 12 Bewertungen. Hast du eine Frage zu JET A635 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Assembly Instructions and Parts Breakdown
A635 Safety Shield
Assembly
To mount Safety Shield to your JET drill press or
milling machine, proceed as follows.
(Numbers in parentheses refer to index numbers in
Figure 1 and exploded view. Refer to exploded view
on reverse side if clarification is needed.)
1. If there are no existing mounting holes on your
machine, drill two threaded holes at least 1/2 in.
deep in left side of machine headstock. [If you
are using the provided M8 socket head screws
(#14), drill M8-1.25 holes.] Use bracket (#7) as
template for hole pattern.
NOTE: Make sure bracket location will allow
shield to clear front of headstock.
2. Install bracket assembly (#7) to headstock with
two M8X20 socket head screws (#14).
3. Install support arm (#11) and secure with hex
nut and spring washer (#12/13).
4. Install lower bracket bar (#9) and secure with
hex nut and flat washer.
5. Mount shield (#8) to lower bracket bar (#9)
using two socket head screws (#10) and flat
washers (#17).
6. Install limit switch (#18) if desired. (Wiring
connections must be made by qualified
electrician.)
Adjustments
Loosen lock handle (5) to adjust vertical positioning
of shield. Tighten lock handle before operating
machine.
Loosen knob (15) to adjust horizontal positioning of
shield. Tighten knob before operating machine.
Figure 1
JET
427 New Sanford Road
LaVergne, Tennessee 37086 Part No. M-A635
Ph.: 800-274-6848 Edition 1 12/2015
www.jettools.com Copyright © 2015 JET


Produktspezifikationen

Marke: JET
Kategorie: Nicht kategorisiert
Modell: A635

Brauchst du Hilfe?

Wenn Sie Hilfe mit JET A635 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten