Kichler 15502CBR Bedienungsanleitung

Lies die bedienungsanleitung für Kichler 15502CBR (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 3 Bewertungen. Hast du eine Frage zu Kichler 15502CBR oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

MODEL# 15502CBR

AHPSDJUSTEIGHTATHMALL

1

3

4

5

6

7

2

8

9

10

11

12

13

14

16

17

15

18

19

1.N 2. 3. 4. ippleO-RingUpper ShadeLower

ShadeLensScrewCoupling 5. 6. 7.

8.BushingSocket ScrewSocket 9. 10.

11.Inner StemLocking Ring 12. 13. Gasket

14.Secure Ring A 15. 16. Secure Ring BOuter

StemCableLock NutSpike 17. 18. 19.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE,OR INJURY TO

PERSONS

IMPORTANT SAFETY INSTRUCTIONS

Lighted lamp is HOT!

WARNING — To reduce the risk of FIRE OR INJURY TO PERSONS.

CAUTION

WHEN INSTALLING KICHLER LANDSCAPE LIGHTING (LINE VOLTAGE OR LOW VOLTAGE), CARE SHOULD BE TAKEN TO KEEP CLEAR OF POTENTIALLY COMBUSTIBLE

MATERIALS.

WHEN MAINTAINING THE FIXTURES, BE SURE TO REMOVE LEAVES, PINE NEEDLES, OR ANY DEBRIS THAT HAS ACCUMULATED ON THE GRASS CLIPPINGS, MULCH,

LIGHT BULB, LENS, OR BODY OF THE FIXTURE.

ASSEMBLY AND INSTALLATION

1.

TURN OFF POWER

2.

Determine desired location, hammer the spike into ground. If ground is hard, a crosscut in the using a rubber malletmake

ground using a flat shovel.

3.

Clear away area in ground at wireway slot in top of spike.

4.

Adjust height of fixture by loosening the locking ring, then tightening the locking ring when a desiredheight is set.

5.

Lay 12V cable into wireway slot and screw fixture into spike.

6.

Expose the socket by loosening the from stem. Install the G4 / T3 lamp into socket.COUPLING

7.

Re-install COUPLING back to stem.

8.

Make connection using approved wir (not supplied) e nuts

For warranty information please visit: http://www.landscapelighting.com/portal/warranty_page

Para informacion de la garantia por favor visite: www.landscapelighting.com/portal/warranty_page

Date Issued: 4/27/17

IS--US15502

Weʼre here to help 844-542-4537

Hrs: M-F 8am to 6:30pm EST

1)Turn off / unplug and allow to cool before replacing lamp.

2)Lamp gets HOT quickly!

3)Do not touch hot lens or cowl.

4)Do not touch lamp or fixture if warm.

5)Do not look directly at lamp when on.

6)Keep lamp away from combustible materials.

7)Use only with wattage and lamp marked on fixture.

8)Do not touch the innerglass envelope of the lamp at any time. Use a soft

cloth. Oil from skin may damage lamp.

9)Do not operate the fixture with a damaged or missing lens.

2)

SAFETY INSTRUCTIONS

READ THIS FIRST

KEEP THESE INSTRUCTIONS

This fixture is intended for installation in accordance with the National Electric

Code (NEC) and Local code specifications. Failure to adhere to these codes and

instructions may result in serious injury and/or property damage and will void the

warranty.

1)

WARNING:

This fixture is not to be installed within 10 feet (3M) of a pool, spa or

fountain.

This fixture is to be used only with a power unit (

transformer) rated a maximum of

300 W (25 AMPS) 15 volts per circuit.

3)The #18 ga. fixture wire is not intended for direct burial or connected to

transformer.

4)Direct burial rated wire is to be buried a minimum of 6” (152mm) beneath the

surface of the ground. If additional Direct Burial wireis needed, contactNOTE:

your local Kichler

®

landscape distributor.

•8 GA wire can be purchased in length of 250’ (76 M), 15503-BK.

•10 GA wire can be purchased in length of 250’ (76 M), 15504-BK.

•12 GA wire can be purchased in lengths of 100’ (30 M), 15501-BK; 250’ (76 M),

15502-BK; 500’ (152M), 15505-BK; and 1000’ (304 M),15506-BK.

5)Fixture shall not use a tungsten halogen lamp unless the fixture is marked for

use with such lamps.

6)Wiring connections must be made with approved/listed wire connection

device(s) suitable for the application. Do not exceedmanufacturers’ wiring

combination specifications for size and quantity of conductors.

Produktspezifikationen