Kicker 47KMFC9 Bedienungsanleitung
Kicker
Lautsprecher
47KMFC9
Lies die bedienungsanleitung für Kicker 47KMFC9 (9 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 12 Bewertungen. Hast du eine Frage zu Kicker 47KMFC9 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/9
EOP2020-CS2
5/17/2021
REV-A.2
47KMFC Mount Conguration Guide
Page of 1 9
The 47KMFC xed mounting system is designed to mount to at surface applications. The
four by 64mm) bolt pattern accepts multiple styles of fasteners providing ease of tment to 2.5” (
existing vehicles while also speeding assembly. The KMFC mount accepts either 5/16” or 8mm
bolts and nuts. Three bolting congurations are designed into the mount providing the customer
with options to best t their application:
• Bolt-thru-mounting
• Bolt- -mounting to
• Stud mounting
This document addresses these congurations to provide insight into the capability of the KMFC
mounting system.
MOUNTING YOUR NEW ENCLOSURE
The use of at washers is suggested between the mounting surface and tightening
fastener. Loctite Threadlocker 271 (red) is not included but required for installation. The
following parts identied are included and required for mounting your new enclosure.
1. Electrical Connector
2. -18UNC hex nuts 5/16”
3. -18UNC hex head bolts 1½” long 5/16”
4. -18UNC socket head bolts 7/8” long 5/16”
5. Vehicle Mount
6. Speaker Enclosure
EOP2020-CS2
5/17/2021
REV-A.2
47KMFC Mount Conguration Guide
Page of 2 9
SPLICING THE ELECTRICAL CONNECTORS
A pre-pinned waterproof electrical connector is provided with your enclosure. Splice the
electrical connector to your vehicle’s audio harness using marine grade waterproof butt
connectors or another method of marine grade electrical wire splicing. See the wiring schematic
below and spice accordingly.
EOP2020-CS2
5/17/2021
REV-A.2
47KMFC Mount Conguration Guide
Page of 3 9
BOLT-THRU-MOUNTING
Bolt-thru-mounting of the KMFC mounting system requires use of socket head bolts
(socket head bolts for bolt-thru-mounting are not included). Thru mounting allows for the mount
to be secured to a surface that has previously been tapped with threads. Nuts may also be use in
place of tapped threads.
1. Apply Loctite Threadlocker 271 (red) to the threads of the -18UNC desired length 5/16”
socket head bolts.
2. Locate the vehicle side mounting bracket where it is to be mounted in on the vehicle and
secure it using four socket head bolts.
3. Torque fasteners to 10 ft-lbs.
Produktspezifikationen
| Marke: | Kicker |
| Kategorie: | Lautsprecher |
| Modell: | 47KMFC9 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Kicker 47KMFC9 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Kicker
3 Dezember 2024
3 Dezember 2024
30 November 2024
30 November 2024
30 November 2024
30 November 2024
30 November 2024
30 November 2024
2 Oktober 2024
27 September 2024
Bedienungsanleitung Lautsprecher
- Polk Audio
- JL Audio
- Nikkei
- Meinl
- Phonocar
- Edifier
- Audio Solutions
- Panasonic
- MuxLab
- WyreStorm
- The Box
- Marshall Electronics
- PSB
- Kinyo
- Deluxa
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025