König KN-RCSENIOR Bedienungsanleitung

Lies die bedienungsanleitung für König KN-RCSENIOR (68 Seiten) kostenlos online; sie gehört zur Kategorie Fernbedienung. Dieses Handbuch wurde von 6 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 9 Bewertungen. Hast du eine Frage zu König KN-RCSENIOR oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

T VSAT

OK

VOL-

VOL+

P-

LEARN

0

789

456

123



2

3

0

11

9

4

6

8

7

5

12

KN-RCSENIOR

Remote control

Description English

1. On/o button• Press the button to switch the TV on or o.

2. TV button• Press this button to control the TV.

3. Satellite button

• Press this button to control the set-top-box or

other programmed devices.

4. Previous program button

• Press the buttons to navigate through the

programs.

5. Next program button

6. Volume - button

• Press the button to increase or decrease the

volume.

7. Volume + button

8. OK button• Press the button to conrm a selection.

9. Mute button• Press the button to mute the sound..

10. Learn button

• In learn mode, press the button to activate the

signal before copying functions from other

remote controls.

11. Digit buttons• Press the buttons to select the channel.

12. LED indicator• The LED indicator shows the status of the device.

Use

Programming the remote control to the TV or another device

1. Switch on the device to be programmed.

2. Look for the brand of the TV that you want to program in the code list. Make a note of the rst code in the list.

3. Press and hold the TV or satellite button of the remote control until the LED indicator comes on.

4. Enter the previously identied code.

Note: If the LED indicator goes o, it indicates that the code is accepted. If it switches on or o the TV, it indicates that the code is

correct. If it does not switch on or o the TV, repeat from step 2 to try another code.

Auto search

1. Switch on the device to be programmed.

2. Press and hold the TV and satellite buttons simultaneously until the LED indicator comes on.

3. Point the remote control to the device. Press and slowly release the on/o button.

Note: If the device is switched o, it indicates that the code is found.

Produktspezifikationen