Lectrosonics SSM/E02 Bedienungsanleitung


Lies die bedienungsanleitung für Lectrosonics SSM/E02 (24 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Lectrosonics SSM/E02 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/24
SSM
Digital Hybrid Wireless
®
Micro Transmitter
SSM, SSM-941, SSM/E01, SSM/E01-B2, SSM/E02, SSM/E06, SSM/X
INSTRUCTION MANUAL
Rio Rancho, NM, USA
www.lectrosonics.com
Fill in for your records:
Serial Number:
Purchase Date:
Quick Start Steps
1) Install a good battery and turn power on (see pages
5 and 8).
2) Set the compatibility mode to match the receiver
(see page 9).
3) Connect the signal source and adjust input gain for
optimum modulation level (see page 10).
4) Set Step Size and frequency to match receiver (see
pages 8 and 9). Also refer to the receiver manual for
the RF scanning procedure to nd a clear operating
frequency.
5) Turn on the receiver and verify that solid RF and
audio signals are present (see receiver manual).
WARNING: Moisture, including talent’s sweat,
will damage the transmitter. Wrap the SSM
in a plastic bag or other protection or use the
SSMCVR to avoid damage.
SSM, SSM-941, SSM/E01, SSM/E02, SSM/E06, SSM/X
LECTROSONICS, INC.
2


Produktspezifikationen

Marke: Lectrosonics
Kategorie: Nicht kategorisiert
Modell: SSM/E02

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lectrosonics SSM/E02 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten