LevelOne WAC-2010 Bedienungsanleitung

LevelOne Schalten WAC-2010

Lies die bedienungsanleitung für LevelOne WAC-2010 (23 Seiten) kostenlos online; sie gehört zur Kategorie Schalten. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 12 Bewertungen. Hast du eine Frage zu LevelOne WAC-2010 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/23
Web Management Guide
!
8
Wireless management gateway direct connected topology diagram, direct networking refers to
the direct access to the AP or access switch under the AC, and the data and management
services of the AP are forwarded and processed by the AC in a centralized manner.
Wireless management gateway bypass topology diagram, bypass networking refers to the AC bypass in the
existing network (mostly next to the aggregation switch) to achieve business management of the AP.
To set the bypass mode, you need to select the bypass mode in Network Settings - External Network
Settings - Internet Access Method. You can choose Dynamic IP [DHCP] or Static IP for address acquisition,
manually fill in the internal network IP address, subnet mask, default gateway, DNS, and click Apply.
After setting up, network according to the network topology map.
8
Logging on to the equipment
l
Connect the RJ- 45 interface cable of a controller with a computer using a network cable.
l
Set the TCP/IP properties of the computer.
Windows
1.
Click Start— > Control Panel > Network and Internet > Network and Sharing Center >
Change adapter settings, right click Local connection and select Properties.
2.
D - ouble click Internet Protocol 4 (TCP/IPv4)
Set the computer's IP address: The computer's IP address should be any one of the following
free IP addresses , , to return to the previous 192.168.1.2 ~ 192.168.1.253 and then click OK
page, click OK.
3.
Logging on to a and and the equipment: Open browser type the address 192.168.1.1 in bar, then
press Enter; in the pop up login - interface, enter the factory logon username "admin", password
" admin" and click OK.


Produktspezifikationen

Marke: LevelOne
Kategorie: Schalten
Modell: WAC-2010

Brauchst du Hilfe?

Wenn Sie Hilfe mit LevelOne WAC-2010 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten