Lewitt LCT 340 Bedienungsanleitung

Lies die bedienungsanleitung für Lewitt LCT 340 (1 Seiten) kostenlos online; sie gehört zur Kategorie Telefon. Dieses Handbuch wurde von 39 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 20 Bewertungen. Hast du eine Frage zu Lewitt LCT 340 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

// LCT 340

QUICKSTART GUIDE

BRUTALLY HONEST

BEAUTIFULLY CLEAR

PROFESSIONAL MULTIPURPOSE

PENCIL MICROPHONE

// Getting started

1Connect your microphone to your mixing console, audio interface or microphone

preamplifi er using a 3-pin XLR cable.

2Supply the LCT 340 with 48V phantom power.

3Choose your settings.

4You are ready to go!

// Overview

// Externally polarized small diaphragm (0.8“ / 20 mm) condenser microphone

//Cardioid polar pattern for effective isolation of the main sound source

// Interchangeable capsules for cardioid and omnidirectional pattern

// Flat frequency response

// High dynamic range and very low self-noise

// 4 low-cut settings: linear, 40 Hz (12 dB/oct), 150 Hz (6 dB/oct), 300 Hz (6 dB/oct)

// 4 pre-attenuation settings: 0 dB, -6 dB, -12dB and -18 dB

// Illuminated user interface for easy handling even in dark environments

// Gold plated & corrosion-resistant 3-pin XLR output connector

Top applications // Acoustic instruments, drums and percussion, wind instruments

// User interface

1Illuminated attenuation display //The currently active attenuation setting is illuminated.

2Recessed attenuation slide switch//Choose between 0 dB, -6 dB, -12 dB and -18 dB by adjusting the slide switch. Attenuation

is used in high SPL environments in order to prevent clipping of the microphone, mixer and other audio equipment.

3 Illuminated low-cut fi lter display //The currently active low-cut setting is illuminated.

4 Recessed low-cut fi lter slide switch //Choose between linear, 40 Hz (12 dB/oct), 150 Hz (6 dB/oct) and 300 Hz (6 dB/oct)

by adjusting the slide switch. Low-cut fi lters eliminate unwanted low frequency noise such as structure borne noise, wind and

handling noise. Do not forget to use the supplied windshield if suitable.

5Recessed LED on/off push button//By briefl y pressing the recessed push button the LED illumination can be turned on or off.

// Please Note

// The capsule is a sensitive, high precision component. Make sure you do not drop it from high heights and avoid strong mechanical

stress and force.

// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme

temperatures. Use supplied windshield if suitable.

// Do not apply excessive force on the switches or the connected cable.

// When disconnecting the microphone cable, grasp the connector and do not pull the cable.

// Do not attempt to modify or fi x the microphone, as it would void your product warranty.

// The casing of the microphone can be cleaned easily using a wet cloth,

never use alcohol or another solvent for cleaning.

// The windshield can be washed with soap water, if necessary.

READ THE

FULL MANUAL!

LEARN EVERYTHING ABOUT YOUR LCT 340

www.lewitt-audio.com/resources/manuals/LCT-340.pdf

LEWITT

®

Burggasse 79

1070 Vienna

Austria

www.lewitt-audio.com

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

1

2

3

4

5

Produktspezifikationen