Lewitt MTP 740 CM Bedienungsanleitung

Lies die bedienungsanleitung für Lewitt MTP 740 CM (1 Seiten) kostenlos online; sie gehört zur Kategorie Telefon. Dieses Handbuch wurde von 58 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 5 Bewertungen. Hast du eine Frage zu Lewitt MTP 740 CM oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

// Overview

// Handheld large diaphragm condenser microphone

// Cardioid polar pattern for effective isolation of the main sound source

// Flat frequency response for natural sound

// 2 pre-attenuation settings: 0 dB, -10 dB

// 2 low-cut settings: linear, 80 Hz (6 dB/oct)

// LED status indicator for low-cut and pre-attenuation settings

// Integrated acoustic pop and windshield - washable

// Solid full-metal, die-cast body

// Gold plated & corrosion-resistant 3-pin XLR output connector

Top applications //Vocals, acoustic instruments, studio & live

applications, spoken word and live interviews

// User interface

1LED status indicator// Indicates active low-cut fi lter (A) and

pre-attenuation setting (): B

A1: linear A2: 80Hz (6 dB/oct)

B1B2: 0 dB attenuation : -10 dB attenuation

2LED slide switch//The LED status indicator can be turned on/off

using the slide switch.

3Attenuation level slide switch//Choose the attenuation level

by adjusting the slide switch. Attenuation levels are: 0 dB and -10 dB.

Attenuation is used in high SPL environments in order to prevent

clipping of the microphone, mixer and other audio equipment.

4Low-cut fi lter slide switch Choose between linear and //

80 Hz (6 dB/oct) settings by adjusting the slide switch. Low-cut

fi lters eliminate low-frequency sounds to compensate the proximity

effect and reduce structure-borne noise.

1

2

3

4

1

A

12

B

LEWITT

®

Burggasse 79

1070 Vienna

Austria

www.lewitt-audio.com

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

// Getting started

1Connect your microphone to your mixing console, audio interface

or microphone preamplifi er with a 3-pin XLR cable.

2Supply the MTP 740 CM with 48V phantom power.

3Set the input gain on your mixing console, preamp, etc. accordingly.

4To ensure best sound quality, do not cover any part of the grille.

// Please Note

// To ensure high sensitivity and best sound reproduction of the microphone, avoid exposing it to moisture, dust or extreme temperatures.

// Do not apply extensive force on the switches or cable of the microphone.

// Do not attempt to modify or fi x the microphone, as it would void your product warranty.

// The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning.

// The integrated acoustic pop and windshield can be washed with soap water, if necessary.

READ THE

FULL MANUAL!

LEARN EVERYTHING ABOUT YOUR MTP 740 CM

www.lewitt-audio.com/resources/manuals/MTP-740-CM.pdf

// MTP 740 CM

QUICKSTART GUIDE

STUDIO TECHNOLOGY

ON STAGE

HANDHELD PERFORMANCE MICROPHONE

WITH 1-INCH STUDIO CONDENSER CAPSULE

Produktspezifikationen