MAGUS Metal V700 Bedienungsanleitung
Lies die bedienungsanleitung für MAGUS Metal V700 (26 Seiten) kostenlos online; sie gehört zur Kategorie Mikroskop. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu MAGUS Metal V700 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/26
M A G U S M E TA L V 7 0 0 D I C
M E TA L L U R G I CA L I N V E RT E D M I C R O S C O P E
U S E R M A N U A L
LevenhukInc. (USA)
928 E 124th Ave. Ste D, Tampa, FL 33612, USA
+1 813 468-3001
contact_us@levenhuk.com
LevenhukOptics s.r.o. (Europe)
VChotejně 700/7, 102 00 Prague 102, Czech Republic
+420 737 004-919
sales-info@levenhuk.cz
Magus® is a registered trademark of Levenhuk, Inc.
© 2006–2025 Levenhuk, Inc. All rights reserved.
www.levenhuk.com
20250421
Before using the microscope, please read this user manual carefully
to study the instrument design, operation modes and procedures,
operational limitations, and safety precautions.
Due to the continuous improvements in the microscope design, this
manual may not reflect minor design changes that do not affect the
microscope performance and operation procedures.
1. To avoid electric shock or fire, switch off and unplug the microscope before assembling the microscope,
replacing the bulb or fuse.
2. Do not disassemble the microscope, except for the removable parts specified in this manual. This can
seriously damage its performance. In case of malfunction, please contact a qualified service center.
3. Make sure that the input voltage of the microscope matches that of the local power supply. Using the
power supply with the wrong input voltage may cause a short circuit or fire.
4. Using an incorrect bulb, fuse, or power cord may damage the microscope or cause a fire. The power cord
must be grounded reliably.
5. In order to avoid a short circuit or any other malfunction, do not expose the microscope to high
temperatures or humid or moist environments for a long period of time.
6. If water splashes on the microscope, immediately switch the power off, unplug the power cord, and wipe
off the water with a dry cloth.
7. The microscope light bulb generates high temperatures during operation. To avoid burns, do not touch
the collector lens or the bulb itself for 10 minutes after the lights have been switched off. To prevent fire,
do not place paper or flammable or explosive materials near the air vents on the underside of the base.
8. The microscope employs a coaxial coarse/fine focusing mechanism. Do not turn the left/right coarse/
fine focusing knobs in opposite directions. When the limit is reached, you should no longer rotate the
coarse focusing knob.
9. Do not expose the microscope to direct sunlight or other light sources. Do not expose the microscope
to high temperatures, humidity, or dust; otherwise, it may cause condensation, mold growth, or
contamination of the optical parts.
10. Do not touch the lens surfaces with your fingers. Use a brush and special lens-cleaning solution to keep
the lenses clean.
11. Bulb installation:
— Do not touch the glass surface of the bulb with your bare hands. When installing the bulb, wear gloves
or wrap the bulb with a cotton cloth.
— Use a clean cotton cloth moistened with alcohol-based disinfectant to wipe dirt off the surface of the
bulb. Dirt may etch the surface of a bulb, thereby reducing its brightness and shortening its life.
— Check the bulb contact condition. If contact damage occurs, the bulb may stop working or cause a short
circuit.
— When replacing the bulb, its base should be inserted as deeply as possible into the socket. If the bulb
is not correctly inserted, it may pop out of the socket or cause a short circuit.
SAFETY PRECAUTIONS
Produktspezifikationen
| Marke: | MAGUS |
| Kategorie: | Mikroskop |
| Modell: | Metal V700 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit MAGUS Metal V700 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mikroskop MAGUS
17 Juli 2025
17 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
Bedienungsanleitung Mikroskop
- Ideal Tek
- Leica
- Learning Resources
- National Optical
- Barska
- BeaverLab
- Reflecta
- Carson
- Vivitar
- Boeco
- National Geographic
- Veho
- Steinberg
- Toolcraft
- Hama
Neueste Bedienungsanleitung für -Kategorien-
17 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
16 Juli 2025
15 Juli 2025
15 Juli 2025
15 Juli 2025