Marshall Electronics FR 310 Bedienungsanleitung


Lies die bedienungsanleitung für Marshall Electronics FR 310 (2 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 45 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 23 Bewertungen. Hast du eine Frage zu Marshall Electronics FR 310 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
Note: Your recording device may have internal gain controls that may
need to be adjusted to get the best results. Consult your devices user
manual for more information.
Switch #2 has three positions, which are labeled Off, On” and Roll-off.
When this switch is in theOff” position, the microphone is off and will not
draw power from the battery. The “On” position turns the microphone on
and sets it to record with no filtering. The “Roll-off” position sends the
signal through the microphones high-pass filter to reduce or eliminate
low-frequency noise. For example, older camcorders sometimes
produce low-frequency motor noise. The high-pass filter will reduce or
eliminate this noise.
Specifications
4
FR-310
Hot Shoe Mount Shotgun Microphone
w w w. m x l m i c s . c o m
Solid metal construction
Integrated windscreen
Three-position
gain switch
Bass roll-off
(high-pass lter)
Standard hot shoe mount
Transducer: 10mm Electret Condenser
Polar Pattern: Supercardioid
Frequency Response: 40Hz—20kHz
Output Impedance: 250 ohms
Power Requirements: 1.5V AAA Battery
Bass Roll-Off: -6 dB/octave at 150Hz
Gain: -5dB, 0dB, +5dB
Output Connector: 1/8" (3.5mm) Mini TRS
Output Signal: Mono
Battery Life: Up to 500 hours
Dimensions: 5.3" x 2.5" (135mm x 63mm)
Weight: 0.30 lbs (136 g)


Produktspezifikationen

Marke: Marshall Electronics
Kategorie: Mikrofon
Modell: FR 310

Brauchst du Hilfe?

Wenn Sie Hilfe mit Marshall Electronics FR 310 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten