Marshall V-LCD4.3-PRO-R Bedienungsanleitung

Marshall Monitor V-LCD4.3-PRO-R

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Marshall V-LCD4.3-PRO-R (1 Seiten) in der Kategorie Monitor. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2.5 Benutzern mit durchschnittlich 3.5 Sternen bewertet

Seite 1/1
Marshall Electronics
V-LCD4.3-PRO-R
To operate unit, insert the power plug into the power jack (center pin is
+12VDC located on the side of the monitor. Turn the unit on by pushing
the power button-in. The unit is turned off by depressing the power
button. The unit is equipped with NTSC/PAL auto recognition logic.
Simply supply a NTSC or PAL composite video signal to either of the
two video BNC connectors labeled IN. Select the active BNC input by
using the selector switch. Adjust the picture by using the control knobs
The V-LCD4.3-PRO-R is equipped with an active loop-through circuit.
This loop-through will only work when power is supplied to the
monitor. The monitor also has a 1/4-20 mount located on the bottom
of the unit. This is useful when mounting the monitor on the top of a
camera by using a hot shoe mount (Marshall part# ) or other M-SM03
mounting devices.
Display 4.3 LCD Active Matrix
Input 2 NTSC/PAL Inputs with Loop-through
Color Full Color
Picture 480H x 272V
Pitch 0.066(W) mm x 0.198(H) mm
Controls Power On/O󰀨, Color, Brightness, Tint, Contrast
Brightness 500 nits
Power Supply 12 VDC, 350mA
Connectors Video BNC, 5.5mm DC power jack
Dimentions 5.51W x 3.62H x 1.81D
1. Contrast
2. Tint
3. Color
4. Brightness
5. Selector Switch
6. Power On/Off
7. Power In 12VDC
8. BNC Inputs and Outputs
1 2 3 4
5
6
8
7
1/4”-20 mount


Produktspezifikationen

Marke: Marshall
Kategorie: Monitor
Modell: V-LCD4.3-PRO-R

Brauchst du Hilfe?

Wenn Sie Hilfe mit Marshall V-LCD4.3-PRO-R benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten