MB Quart MBQS-RADM-1 Bedienungsanleitung


Lies die bedienungsanleitung für MB Quart MBQS-RADM-1 (10 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 42 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 21.5 Bewertungen. Hast du eine Frage zu MB Quart MBQS-RADM-1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/10
Installation Instructions
Model:
Polaris Slingshot Gen 3 (2020 to 2024)
Description:
MB Quart GMR-7 Radio Dash Kit for Polaris Slingshot
Part Number:
MBQS-RADM-1
Assembly Time:
45 Minutes (0.75-Hours)
2 T25 Torx Driver
3 T27 Torx Driver
4 T40 Torx Driver
5 8mm Allen Wrench
6 Phillips Screw Driver
Tools Required
It is always a best practice to disconnect your negative battery terminal prior to any electronics
installations to avoid damaging the vehicles electrical system. Before you begin, read through
these instructions and check that all parts are present.
This installation may require special skills and tools to complete and it may be necessary to seek
a trained installation technician to complete this installation. Please note that MB Quart cannot
assume any responsibility for damage resulting from incorrect installation.
No. Component Name Qty
1 Radio Dash Panel 1
2 Radio Harness 1
3 Antenna 1
4 PSAP-2USB 1
5 M4 x 10mm Phillips Screw 4
6 M4 Washer 4
7 8" Zip Tie 4
Parts List
Page 1 of 10


Produktspezifikationen

Marke: MB Quart
Kategorie: Nicht kategorisiert
Modell: MBQS-RADM-1

Brauchst du Hilfe?

Wenn Sie Hilfe mit MB Quart MBQS-RADM-1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten