MB Quart MBQG-STG2-RAD Bedienungsanleitung


Lies die bedienungsanleitung für MB Quart MBQG-STG2-RAD (12 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu MB Quart MBQG-STG2-RAD oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/12
Page 1 of 12
Installation Instructions
Model:
Polaris General
Description:
Stage 2 Install
Part Number:
MBQG-STG2-RAD
Assembly Time:
60 Min (1-Hour)
1 GMR-LED with Housing (MBQG-RAD-1) 1
2 6.5 Dash Speakers (MBQG-FPOD-1) 2
1 Bojo Tool
2 Panel Clip Pliers
3 7mm & 10mm wrench
4 T25 Torx Driver
5 11/32 Drill Bit
6 Drill
Tools Required
Parts List
Before you begin, read through these instructions and check that
all parts are present. Always disconnect negative battery terminal
prior to installation. Please note that MB Quart cannot assume any
responsibility for damage resulting from incorrect installation.
Page 2 of 12
Dash Disassembly
● Remove hood by turning two
latches
● Remove seven push clips from
front of dash
Page 3 of 12
Dash Disassembly
● Lift front of dash at eight locations
with Bojo tool
● Remove top two push pins
from driver and passenger door
opening


Produktspezifikationen

Marke: MB Quart
Kategorie: Nicht kategorisiert
Modell: MBQG-STG2-RAD

Brauchst du Hilfe?

Wenn Sie Hilfe mit MB Quart MBQG-STG2-RAD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten