MB Quart MBQT-SUB-1 Bedienungsanleitung


Lies die bedienungsanleitung für MB Quart MBQT-SUB-1 (17 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu MB Quart MBQT-SUB-1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/17
Page 1 of 17
Installation Instructions
Model:
Honda Talon
Description:
Stage 5 Install
Part Number:
MBQT-SUB-1
Assembly Time:
60 Min (1-Hour)
1 8 Subwoofer w/Enclosure (MBQT-SUB-1) 1
2NA2-400.1 Amplier 1
Parts List
1 Bojo Tool
2 Panel Clip Pliers
3 10mm open box wrench
4 10mm and 12mm socket
5 ½ socket
6 Rachet
7Small at head screwdriver
8Phillips screwdriver
9 3mm and 5mm Allen Wrench
10 ¼ and ½ drill bit or stepper bit
11 1 hole saw
12 Drill
13 Rotary tool similar to a Dremel
14 Heat Gun or Lighter
15 Crimper
Tools Required
Before you begin, read through these instructions and check that
all parts are present. Always disconnect negative battery terminal,
prior to installation. Please note that MB Quart cannot assume any
responsibility for damage resulting from incorrect installation.
Page 2 of 17
Disassembly
● Remove hood by turning
two latches
● Remove four 10mm bolts, four
push pins, and ve 5mm allen
bolts to remove top of dash
● Remove half mud guard with six
push pins
Page 3 of 17
Disassembly
● Release latch at front of driver
and passanger and lower
cushions to remove
● Remove two 12mm bolts on front
of drivers seat
● Slide driver seat forward and
remove two 12mm bolts on rear
of seat


Produktspezifikationen

Marke: MB Quart
Kategorie: Nicht kategorisiert
Modell: MBQT-SUB-1

Brauchst du Hilfe?

Wenn Sie Hilfe mit MB Quart MBQT-SUB-1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten