Metra 82-1012 Bedienungsanleitung
Metra
Nicht kategorisiert
82-1012
Lies die bedienungsanleitung für Metra 82-1012 (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 5.5 Bewertungen. Hast du eine Frage zu Metra 82-1012 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4

APPLICATIONS
METRA. The World’s best kits.™metraonline.com1-800-221-0932 © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
REV. 12/9/2013 INST82-1012
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
INSTALLATION INSTRUCTIONS FOR PART 82-1012
Dash Disassembly
– Jeep Wrangler 1997-2006 ............................... 2
Kit Preparation ....................................................... 2
Kit Assembly .......................................................... 3
Table of Contents
• 82-1012 (adapts 4” speaker to dash location)
• A) 82-1012 Speaker adaptor plates • B) (8) #8 x 1/2” Phillips screws
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 72-6512 speaker harness
Antenna Adapter: • Not required
• Phillips screwdriver
TOOLS REQUIRED
A B

82-1012
Dash Disassembly Kit Preparation
(Figure A)
Note: Parts 82-1011, 82-1012, 82-1013 installation directions cross reference.
Use the following instructions for each dash location.
1. Remove (2) Phillips screws securing the speaker grille panel. (Figure A)
2. Unclip panel and remove. (Figure A)
Continue to kit preparation
(Figure A)
1. Mount aftermarket speaker to the speaker adaptor plate with the screws
supplied with the speaker. (Figure A)
Continue to kit assembly

82-1012
Kit Assembly
1. Locate the factory wiring harness in the dash. Metra recommends using the
72-6512 speaker harness to connect to the factory wiring.
Note: For some speakers a small cut in the factory speaker support
may be necessary.
2. Mount the assembly to the dash location with the (4) supplied
#8 x 1/2” Phillips screws.
Notes
(Figure A)
Produktspezifikationen
Marke: | Metra |
Kategorie: | Nicht kategorisiert |
Modell: | 82-1012 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Metra 82-1012 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Metra
15 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
5 Juli 2025
1 Juli 2025
27 Juni 2025
8 Juni 2025
8 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Zega
- Redback Technologies
- AutoParkTime
- Ovente
- Elektrobock
- Festool
- 4smarts
- TomTom
- Standard Horizon
- Gami
- Clarke
- PIEPS
- 4moms
- Wibrain
- Revox
Neueste Bedienungsanleitung für -Kategorien-
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025