Metra 88-00-8000 Bedienungsanleitung

Metra Auto Kit 88-00-8000

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Metra 88-00-8000 (24 Seiten) in der Kategorie Auto Kit. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 1.5 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/24
METRA. The World’s best kits.
â„¢
metraonline.com
© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION
REV. 2/1/2016 INST88-00-8000
Installation instructions for part 88-00-8000
• Pocket provision for ISO DIN radio installations
• Holds (3) CD jewel cases
• A) Pocket
KIT FEATURES
KIT COMPONENTS
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • Please visit metraonline.com for options
Antenna Adapter: • Not required
• Panel removal tool • Phillips screwdriver • 10mm socket wrench
TOOLS REQUIRED
Toyota ISO Pocket 1981-2004
88-00-8000
A
APPLICATIONS
See application list inside cover
Table of Contents
Dash Disassembly 2-11
TOYOTA
4-Runner 1984-1988 2
4-Runner 1989-1995 2
4-Runner 1996-2002 3
Camry 1983-1986 3
Camry 1987-1991 3
Celica 1982-1985 4
Celica 1986-1989
4
Celica 1990-1993 4
Corolla (coupe/
hatchback)
1982-1983 5
Corolla 1984-1987 5
Corolla (coupe/
hatchback)
1988-1992 5
Corolla (sedan/wagon-
lower dash)
1988-1992 6
Corolla (sedan/wagon-
upper dash)
1988-1992 6
TOYOTA (Continued)
Corolla (lower dash)
1993-1997 6
Corolla (upper dash)
1993-1997 7
Land Cruiser
1988-1992 7
MR2 1985-1990 7
MR2 1991-1995 8
Paseo 1992-1995 8
Paseo 1996-1997 8
Pickup 1984-1988 9
Pickup 1989-1995 9
Supra 1983-1986 9
Supra 1986.5-1992 10
T-100 1993-1998 10
Tacoma 1995-2004 10
Tercel 1987-1990 11
Tercel 1991-1994 11
Tercel 1995-1998 11
Kit Assembly 12
88-00-8000
2
Applications Dash Disassembly
1
(Figure A)
(Figure A)
4-Runner 1984-1988
1. Remove the ashtray and (3) screws
from the ashtray bracket. Remove
(1) screw from each side of the
dash console and unsnap the trim
bezel. (Figure A)
Continue to kit assembly
4-Runner 1989-1995
1.
Remove the driver’s side speaker panel by
removing (3) screws and (1) 10mm bolt.
Remove (1) screw from the left side of the
housing and unsnap the ignition cover. Remove
the glove compartment assembly by removing
(1) 10mm bolt from the bottom of the speaker
panel and (3) screws from the right side of the
housing. Remove the remaining (3) screws
securing the radio trim bezel. (Figure A)
Continue to kit assembly
TOYOTA
4-Runner 1984-2002
Avalon* 1995-1999
Camry 1983-1991
Camry* 1992-2001
Camry Solara* 1999-2003
Celica 1982-1993
Celica* 1994-1999
Corolla (coupe/
hatchback) 1982-1983
Corolla 1984-1997
Cressida* 1981-1992
Land Cruiser
(without nav)* 2000-2002
Land Cruiser* 1993-1999
Land Cruiser 1988-1992
TOYOTA (Continued)
MR2 1985-1995
Paseo 1992-1997
Pickup 1984-1995
Previa* 1991-1997
Rav-4* 1996-2000
Sequoia* 2001-2002
Sienna* 1996-2003
Supra 1983-1992
Supra* 1994-1998
T-100 1993-1998
Tacoma 1995-2004
Tercel* 1983-1986
Tercel 1987-1998
Tundra* 2000-2002
Van* 1984-1990
* No dash disassembly available
CAUTION!
All accessories, switches, climate controls panels, and especially air bag indica
-
tor lights must be connected before cycling the ignition. Also, do not remove the factory
radio with the key in the on position, or the vehicle running.


Produktspezifikationen

Marke: Metra
Kategorie: Auto Kit
Modell: 88-00-8000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 88-00-8000 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten