Metra 99-8214TG Bedienungsanleitung

Metra Auto Kit 99-8214TG

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Metra 99-8214TG (8 Seiten) in der Kategorie Auto Kit. Dieser Bedienungsanleitung war fĂĽr 2 Personen hilfreich und wurde von 1.5 Benutzern mit durchschnittlich 4.0 Sternen bewertet

Seite 1/8
METRA - The World’s best kits
®
metraonline.com
REV. 3/7/2017 INST99-8214
Installation instructions for part 99-8214
®
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted and textured to match factory dash
• Available in: Black 99-8214TB or Gray 99-8214TG
• Both kits are factory “golf ball” textured
KIT FEATURES
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-1761 • TYTO-01
Antenna Adapter: Not Required
Steering wheel control interface: ASWC-1
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
TOOLS REQUIRED
Toyota Tacoma 2005-2011
99-8214
• A) Radio housing • B) Radio brackets • C) Radio trim panel • D) ISO brackets • E) ISO trim plate
• F) ISO DDIN trim plate • G) Clock/Hazard switch bracket • H) (4) #6 x 3/8” Phillips pan-head screws
• I) (4) #8 X 3/8” Phillips truss-head screws • J) (1) #10 x 3/4” Phillips pan-head screw • K) (4) Panel clips
• L) Plastic threaded insert
KIT COMPONENTS
B C D
E F
A
I J K LG
H
Dash Disassembly ..................................................2
Kit Preparation ........................................................ 3
Kit Assembly
– DIN radio provision with pocket .............................4
– ISO DIN radio provision with pocket .......................5
– ISO DDIN radio provision ........................................ 6
Table of Contents
99-8214
2
1. Unclip, unplug and remove the
climate control panel. (Figure A)
2. Remove the (4) 10mm screws
securing the bottom of the radio/
clock/hazard assembly. (Figure B)
3. Unclip, unplug, and remove the
radio/clock/hazard assembly.
(Figure C)
Continue to Kit Preparation
(Figure C)(Figure B)
SCAN
TEXT
PWR VOL
(Figure A)
SCAN
TEXT
PWR VOL
Dash Disassembly


Produktspezifikationen

Marke: Metra
Kategorie: Auto Kit
Modell: 99-8214TG

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra 99-8214TG benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten