Metra DP-7529 Bedienungsanleitung

Metra Auto Kit DP-7529

Lies die bedienungsanleitung für Metra DP-7529 (8 Seiten) kostenlos online; sie gehört zur Kategorie Auto Kit. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Metra DP-7529 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
Metra. The World’s Best Kits.
®
MetraOnline.com © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 12/6/22 INSTDP-7529
INSTALLATION INSTRUCTIONS
DP-7529
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
KIT FEATURES
ISO DIN radio provision with pocket
ISO DDIN radio provision
Textured to match the factory dash.
Can also be used as a factory dash replacement with factory
Mazda radios.
KIT COMPONENTS
A) Radio housing • B) Radio trim panel • C) Radio brackets • D) Pocket • E) #8 x 3/8” Truss-Head Phillips screws (8) • F) Panel clips (2)
G) #8 x 1/2” Phillips screws (2)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
WIRING & ANTENNA CONNECTIONS
(sold separately)
Wiring Harness: 70-7901
Visit metraonline.com for audio/video and steering
wheel control interface options.
Antenna Adapter: Not required
A B C D
F G
E
Mazda Miata 1994-1997
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
TABLE OF CONTENTS
Dash Disassembly...............................................2-3
Kit Preparation .......................................................4
Kit Assembly
–ISO DIN radio provision with pocket ..................5
–ISO DDIN radio provision.....................................6
386.257.1187
|
MetraOnline.com
2
From the center console:
1. Unclip ashtray to reveal (1) Phillips screw
and remove. (Figure A)
2. Open storage compartment and remove
(2) Phillips screws. (Figure B)
3. Locate the (2) Phillips screws on the
front sides of the gear shifter trim panel
and remove. (Figure C)
4. Unscrew gear shift knob. (Figure D)
5. Unplug (2) connectors and remove the
center console. (Figure E)
Continued on the next page
DASH DISASSEMBLY
(Figure A) (Figure D)
(Figure B) (Figure E)
(Figure C)


Produktspezifikationen

Marke: Metra
Kategorie: Auto Kit
Modell: DP-7529

Brauchst du Hilfe?

Wenn Sie Hilfe mit Metra DP-7529 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten