Microchip ATA6574 Bedienungsanleitung
Microchip
Nicht kategorisiert
ATA6574
Lies die bedienungsanleitung für Microchip ATA6574 (19 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2 Bewertungen. Hast du eine Frage zu Microchip ATA6574 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/19
User Guide
© 2024 Microchip Technology Inc. and its subsidiaries
DS50002672C - 1
Introducon
The ATAB657XA development board is a hardware platform used to evaluate the ATA6570, ATA6571 and
ATA6574 CAN devices and to enable users to rapidly prototype and test new CAN designs with the ATA657X ICs.
The ATA657X device family includes three high-speed Controller Area Network (CAN) transceivers, which
interface with a CAN protocol controller and the physical two-wire CAN bus designed for high-speed CAN
applications (up to 5Mbit/s) in the automotive environment. Two of the ATA device variants also support
partial networking. All oer improved electromagnetic compatibility (EMC) and electrostatic discharge (ESD)
performance and very low-power consumption in Standby and Sleep modes:
• Besides local wake-up via WAKE and remote wake-up pattern in accordance with ISO 11898-5, the ATA6570/
ATA6574 are fully compliant with the ISO 11898-6 supporting CAN partial networking. The ATA6570/ATA6574
additionally supports a CAN-FD device and can be easily congured via the SPI as Non-FD (meaning classical
CAN 2.0), CAN FD silent, CAN FD passive or as CAN FD active device in order to fulll the corresponding
application requirements. The VIO pin allows the automatic adjustment of the I/O levels to the I/O level of
the connected microcontroller.
• The ATA6571 has ideal passive behavior to the CAN bus when the supply voltage is o. Microcontrollers
with supply voltages from 3V to 5V can be directly interfaced via the VIO pin. Its advanced low-power
www.microchip.com Product Pages: ATA6570, ATA6571, ATA6574
ATA6570/ATA6571/ATA6574 Development Board User's
Guide
User Guide
© 2024 Microchip Technology Inc. and its subsidiaries
DS50002672C - 2
management with local and remote wake-up support makes it possible to achieve very low current
consumption in Standby and Sleep mode, even when the internal VIO and VCC supplies are switched
o. Diagnostic and protection functions, including bus line short-circuit detection and battery connection
detection, are also part of the ATA6571's features.
Various operating modes together with the dedicated fail-safe features make the ATA657X an excellent choice
for all types of high-speed CAN networks, especially in nodes requiring low-power mode with local wake-up
capability or via the CAN bus. With the INH output, they have the capability to power down the complete CAN
node.
The ATA657X devices are available in a SOIC14 package as well as in a VDFN14 package, for space-saving
applications. The ATAB657XA development board supports only SOIC14 packages. However, an adaptor board
can be plugged in using the adaptor board-header, if a device in a VDFN package is used (the adaptor board is
not within the scope of supply and services of this demo kit/board).
Figure 1. SOIC14 Pinning
SOIC14
1
2
3
4
ATA6570
5
6
7
TXD
GND
VCC
RXD
VIO
MISO
INH
NCS
CANH
CANL
MOSI
VS
WAKE
SCK
14
13
12
11
10
9
8
1
2
3
4
ATA6571
5
6
7
TXD
GND
VCC
RXD
VIO
EN
INH
NSTBY
CANH
CANL
NC
VS
WAKE
NERR
14
13
12
11
10
9
8
1
2
3
4
ATA6574
5
6
7
TXD
GND
VCC
RXD
VIO
MISO
INH
NCS
CANH
CANL
MOSI
VS
NRES
SCK
14
13
12
11
10
9
8
WAKE
NCS
MOSI
SCK
MISO
MISO
SCK
WAKE
MOSI
NCS
NSTBY
NC
WAKE
NERR
EN
SOIC14 SOIC14
Schematic and Layout for this board are available here: www.microchip.com/en-us/development-tool/
EV16R67A.
Development Board Features
The development board for the ATA657X ICs supports the following features:
• All components necessary to put the ATA6570/ATA6574 or ATA6571 into operation are included
• Placeholders for some optional components for extended functions
• All pins are easily accessible
• Switching into Normal, Standby or Sleep mode via two jumpers (ATA6571)
• Push button included for creating a local wake-up after entering Sleep mode
• LEDs for operation indication
• Ground coulter clip for easy probe connection while measuring with oscilloscope
• Connectors for direct plug-in with the C21-XPRO Xplained board (only ATA6570/ATA6574 with SPI)
What does the ATAB657XA Development Board Kit Contain?
The ATAB657XA Development Board kit includes:
• ATAB657XA Development Board
Produktspezifikationen
| Marke: | Microchip |
| Kategorie: | Nicht kategorisiert |
| Modell: | ATA6574 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Microchip ATA6574 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Microchip
10 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Itho
- Sport Dog
- Greisinger
- Adax
- Sweex
- Neo
- Wibrain
- Pro-Ject
- Atlantis Land
- Nibe
- Infinity
- Biostar
- Skil
- Moultrie
- HyperX
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025