Microchip MIC2111 Bedienungsanleitung


Lies die bedienungsanleitung für Microchip MIC2111 (35 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu Microchip MIC2111 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/35
MIC2111B
High-Performance, Multi-Mode,
Step-Down Controller
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
October
13, 2015
Revision 2.1
General Description
Micrel’s MIC2111B is a programmable-frequency, valley-
current/voltage-mode PWM controller that provides the
control and protection features necessary for power
devices and drivers that use current sensing across the
inductor. The MIC2111B can provide single tri-state PWM
logic signal to work with either power-stage modules or
discrete driver and MOSFETs. The device has precision
enable and power-good (PG) functions for sequencing of
multiple power supplies. In addition, the solution is
compatible with intelligent power stages in a high-current,
step-down DC/DC converter.
To optimize system size and system efficiency, the
MIC2111B frequency can be programmed from 200kHz to
2MHz. The device operates in power-saving mode at light
loads by reducing frequency. Optional outside audio range
operation is possible when the power-stage is configured
in light load mode. The solution uses differential current
sensing for better current-limit accuracy and a dedicated
differential amplifier for remote output sensing for accurate
output voltage control. The MIC2111B has a high-gain
transconductance amplifier for loop compensation.
External slope compensation can be added through a
resistor to avoid sub-harmonic oscillations. Other features
include programmable OCP, output OVP, and thermal
OTP protections. The MIC2111B offers Micrel’s proprietary
bi-directional, single wire fault communication for total
system protection.
The MIC2111B is available in a 20-pin 3mm × 3mm TQFN
package and has a junction temperature range of 40°C to
+125°C.
Datasheets and support documentation are available on
Micrel’s web site at: www.micrel.com
.
Features
Single 3.3V or 5V supply
Supports load currents up to 40A
Programmable valley-current/voltage-mode PWM
architecture
3.3V logic PWM output compatible with power-stage
modules and DrMOS modules
Single tri-state PWM output
Programmable switching frequency: 200kHz to 2MHz.
Differential remote sensing for output voltage and
inductor current
0.6V reference voltage with total ±1% accuracy for
output
Adjustable soft-start/soft-stop and pre-biased safe
startup.
Supports light load and outside audio modes
Programmable slope compensation and loop
compensation
Enable input, power-good (PG) output for sequencing
Programmable OCP, output OVP, thermal OTP, and
dedicated FAULTb pin for system safe startup/stop
Internal thermal shutdown and UVLO
40°C to +125°C junction temperature range
Available in 20-pin 3mm × 3mm TQFN package
Applications
Servers and work stations
Routers, switches, networking/telecom infrastructure
Printers, scanners, graphics and video cards
High current, high-performance POLs


Produktspezifikationen

Marke: Microchip
Kategorie: Nicht kategorisiert
Modell: MIC2111

Brauchst du Hilfe?

Wenn Sie Hilfe mit Microchip MIC2111 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten